diff --git a/lib/puppet/defaults.rb b/lib/puppet/defaults.rb index 2c9c9c474..637284321 100644 --- a/lib/puppet/defaults.rb +++ b/lib/puppet/defaults.rb @@ -1,1702 +1,1702 @@ module Puppet def self.default_diffargs if (Facter.value(:kernel) == "AIX" && Facter.value(:kernelmajversion) == "5300") "" else "-u" end end ############################################################################################ # NOTE: For information about the available values for the ":type" property of settings, # see the docs for Settings.define_settings ############################################################################################ AS_DURATION = %q{This setting can be a time interval in seconds (30 or 30s), minutes (30m), hours (6h), days (2d), or years (5y).} # This is defined first so that the facter implementation is replaced before other setting defaults are evaluated. define_settings(:main, :cfacter => { :default => false, :type => :boolean, :desc => 'Whether or not to use the native facter (cfacter) implementation instead of the Ruby one (facter). Defaults to false.', :hook => proc do |value| return unless value raise ArgumentError, 'facter has already evaluated facts.' if Facter.instance_variable_get(:@collection) raise ArgumentError, 'cfacter version 0.2.0 or later is not installed.' unless Puppet.features.cfacter? CFacter.initialize # Setup Facter's logging again now that native facter is initialized Puppet::Util::Logging.setup_facter_logging! end } ) define_settings(:main, :confdir => { :default => nil, :type => :directory, :desc => "The main Puppet configuration directory. The default for this setting is calculated based on the user. If the process is running as root or the user that Puppet is supposed to run as, it defaults to a system directory, but if it's running as any other user, it defaults to being in the user's home directory.", }, :vardir => { :default => nil, :type => :directory, :owner => "service", :group => "service", :desc => "Where Puppet stores dynamic and growing data. The default for this setting is calculated specially, like `confdir`_.", }, ### NOTE: this setting is usually being set to a symbol value. We don't officially have a ### setting type for that yet, but we might want to consider creating one. :name => { :default => nil, :desc => "The name of the application, if we are running as one. The default is essentially $0 without the path or `.rb`.", } ) define_settings(:main, :logdir => { :default => nil, :type => :directory, :mode => "0750", :owner => "service", :group => "service", :desc => "The directory in which to store log files", }, :log_level => { :default => 'notice', :type => :enum, :values => ["debug","info","notice","warning","err","alert","emerg","crit"], :desc => "Default logging level for messages from Puppet. Allowed values are: * debug * info * notice * warning * err * alert * emerg * crit ", :hook => proc {|value| Puppet::Util::Log.level = value }, :call_hook => :on_initialize_and_write, }, :disable_warnings => { :default => [], :type => :array, :desc => "A comma-separated list of warning types to suppress. If large numbers of warnings are making Puppet's logs too large or difficult to use, you can temporarily silence them with this setting. If you are preparing to upgrade Puppet to a new major version, you should re-enable all warnings for a while. Valid values for this setting are: * `deprecations` --- disables deprecation warnings.", :hook => proc do |value| values = munge(value) valid = %w[deprecations] invalid = values - (values & valid) if not invalid.empty? raise ArgumentError, "Cannot disable unrecognized warning types #{invalid.inspect}. Valid values are #{valid.inspect}." end end } ) define_settings(:main, :priority => { :default => nil, :type => :priority, :desc => "The scheduling priority of the process. Valid values are 'high', 'normal', 'low', or 'idle', which are mapped to platform-specific values. The priority can also be specified as an integer value and will be passed as is, e.g. -5. Puppet must be running as a privileged user in order to increase scheduling priority.", }, :trace => { :default => false, :type => :boolean, :desc => "Whether to print stack traces on some errors", :hook => proc do |value| # Enable or disable Facter's trace option too Facter.trace(value) if Facter.respond_to? :trace end }, :profile => { :default => false, :type => :boolean, :desc => "Whether to enable experimental performance profiling", }, :autoflush => { :default => true, :type => :boolean, :desc => "Whether log files should always flush to disk.", :hook => proc { |value| Log.autoflush = value } }, :syslogfacility => { :default => "daemon", :desc => "What syslog facility to use when logging to syslog. Syslog has a fixed list of valid facilities, and you must choose one of those; you cannot just make one up." }, :statedir => { :default => "$vardir/state", :type => :directory, :mode => "01755", :desc => "The directory where Puppet state is stored. Generally, this directory can be removed without causing harm (although it might result in spurious service restarts)." }, :rundir => { :default => nil, :type => :directory, :mode => "0755", :owner => "service", :group => "service", :desc => "Where Puppet PID files are kept." }, :genconfig => { :default => false, :type => :boolean, :desc => "When true, causes Puppet applications to print an example config file to stdout and exit. The example will include descriptions of each setting, and the current (or default) value of each setting, incorporating any settings overridden on the CLI (with the exception of `genconfig` itself). This setting only makes sense when specified on the command line as `--genconfig`.", }, :genmanifest => { :default => false, :type => :boolean, :desc => "Whether to just print a manifest to stdout and exit. Only makes sense when specified on the command line as `--genmanifest`. Takes into account arguments specified on the CLI.", }, :configprint => { :default => "", :desc => "Print the value of a specific configuration setting. If the name of a setting is provided for this, then the value is printed and puppet exits. Comma-separate multiple values. For a list of all values, specify 'all'.", }, :color => { :default => "ansi", :type => :string, :desc => "Whether to use colors when logging to the console. Valid values are `ansi` (equivalent to `true`), `html`, and `false`, which produces no color. Defaults to false on Windows, as its console does not support ansi colors.", }, :mkusers => { :default => false, :type => :boolean, :desc => "Whether to create the necessary user and group that puppet agent will run as.", }, :manage_internal_file_permissions => { :default => true, :type => :boolean, :desc => "Whether Puppet should manage the owner, group, and mode of files it uses internally", }, :onetime => { :default => false, :type => :boolean, :desc => "Perform one configuration run and exit, rather than spawning a long-running daemon. This is useful for interactively running puppet agent, or running puppet agent from cron.", :short => 'o', }, :path => { :default => "none", :desc => "The shell search path. Defaults to whatever is inherited from the parent process. This setting can only be set in the `[main]` section of puppet.conf; it cannot be set in `[master]`, `[agent]`, or an environment config section.", :call_hook => :on_define_and_write, :hook => proc do |value| ENV["PATH"] = "" if ENV["PATH"].nil? ENV["PATH"] = value unless value == "none" paths = ENV["PATH"].split(File::PATH_SEPARATOR) Puppet::Util::Platform.default_paths.each do |path| ENV["PATH"] += File::PATH_SEPARATOR + path unless paths.include?(path) end value end }, :libdir => { :type => :directory, :default => "$vardir/lib", :desc => "An extra search path for Puppet. This is only useful for those files that Puppet will load on demand, and is only guaranteed to work for those cases. In fact, the autoload mechanism is responsible for making sure this directory is in Ruby's search path\n", :call_hook => :on_initialize_and_write, :hook => proc do |value| - $LOAD_PATH.delete(@oldlibdir) if defined?(@oldlibdir) and $LOAD_PATH.include?(@oldlibdir) + $LOAD_PATH.delete(@oldlibdir) if defined?(@oldlibdir) && $LOAD_PATH.include?(@oldlibdir) @oldlibdir = value $LOAD_PATH << value end }, :environment => { :default => "production", :desc => "The environment Puppet is running in. For clients (e.g., `puppet agent`) this determines the environment itself, which is used to find modules and much more. For servers (i.e., `puppet master`) this provides the default environment for nodes we know nothing about." }, :environmentpath => { :default => "$confdir/environments", :desc => "A search path for directory environments, as a list of directories separated by the system path separator character. (The POSIX path separator is ':', and the Windows path separator is ';'.) This setting must have a value set to enable **directory environments.** The recommended value is `$confdir/environments`. For more details, see http://docs.puppetlabs.com/puppet/latest/reference/environments.html", :type => :path, }, :always_cache_features => { :type => :boolean, :default => false, :desc => <<-'EOT' Affects how we cache attempts to load Puppet 'features'. If false, then calls to `Puppet.features.?` will always attempt to load the feature (which can be an expensive operation) unless it has already been loaded successfully. This makes it possible for a single agent run to, e.g., install a package that provides the underlying capabilities for a feature, and then later load that feature during the same run (even if the feature had been tested earlier and had not been available). If this setting is set to true, then features will only be checked once, and if they are not available, the negative result is cached and returned for all subsequent attempts to load the feature. This behavior is almost always appropriate for the server, and can result in a significant performance improvement for features that are checked frequently. EOT }, :diff_args => { :default => lambda { default_diffargs }, :desc => "Which arguments to pass to the diff command when printing differences between files. The command to use can be chosen with the `diff` setting.", }, :diff => { :default => (Puppet.features.microsoft_windows? ? "" : "diff"), :desc => "Which diff command to use when printing differences between files. This setting has no default value on Windows, as standard `diff` is not available, but Puppet can use many third-party diff tools.", }, :show_diff => { :type => :boolean, :default => false, :desc => "Whether to log and report a contextual diff when files are being replaced. This causes partial file contents to pass through Puppet's normal logging and reporting system, so this setting should be used with caution if you are sending Puppet's reports to an insecure destination. This feature currently requires the `diff/lcs` Ruby library.", }, :daemonize => { :type => :boolean, :default => (Puppet.features.microsoft_windows? ? false : true), :desc => "Whether to send the process into the background. This defaults to true on POSIX systems, and to false on Windows (where Puppet currently cannot daemonize).", :short => "D", :hook => proc do |value| if value and Puppet.features.microsoft_windows? raise "Cannot daemonize on Windows" end end }, :maximum_uid => { :default => 4294967290, :desc => "The maximum allowed UID. Some platforms use negative UIDs but then ship with tools that do not know how to handle signed ints, so the UIDs show up as huge numbers that can then not be fed back into the system. This is a hackish way to fail in a slightly more useful way when that happens.", }, :route_file => { :default => "$confdir/routes.yaml", :desc => "The YAML file containing indirector route configuration.", }, :node_terminus => { :type => :terminus, :default => "plain", :desc => "Where to find information about nodes.", }, :node_cache_terminus => { :type => :terminus, :default => nil, :desc => "How to store cached nodes. Valid values are (none), 'json', 'msgpack', 'yaml' or write only yaml ('write_only_yaml'). The master application defaults to 'write_only_yaml', all others to none.", }, :data_binding_terminus => { :type => :terminus, :default => "hiera", :desc => "Where to retrive information about data.", }, :hiera_config => { :default => "$confdir/hiera.yaml", :desc => "The hiera configuration file. Puppet only reads this file on startup, so you must restart the puppet master every time you edit it.", :type => :file, }, :binder_config => { :default => nil, :desc => "The binder configuration file. Puppet reads this file on each request to configure the bindings system. If set to nil (the default), a $confdir/binder_config.yaml is optionally loaded. If it does not exists, a default configuration is used. If the setting :binding_config is specified, it must reference a valid and existing yaml file.", :type => :file, }, :catalog_terminus => { :type => :terminus, :default => "compiler", :desc => "Where to get node catalogs. This is useful to change if, for instance, you'd like to pre-compile catalogs and store them in memcached or some other easily-accessed store.", }, :catalog_cache_terminus => { :type => :terminus, :default => nil, :desc => "How to store cached catalogs. Valid values are 'json', 'msgpack' and 'yaml'. The agent application defaults to 'json'." }, :facts_terminus => { :default => 'facter', :desc => "The node facts terminus.", }, :default_file_terminus => { :type => :terminus, :default => "rest", :desc => "The default source for files if no server is given in a uri, e.g. puppet:///file. The default of `rest` causes the file to be retrieved using the `server` setting. When running `apply` the default is `file_server`, causing requests to be filled locally." }, :http_proxy_host => { :default => "none", :desc => "The HTTP proxy host to use for outgoing connections. Note: You may need to use a FQDN for the server hostname when using a proxy. Environment variable http_proxy or HTTP_PROXY will override this value", }, :http_proxy_port => { :default => 3128, :desc => "The HTTP proxy port to use for outgoing connections", }, :http_proxy_user => { :default => "none", :desc => "The user name for an authenticated HTTP proxy. Requires the `http_proxy_host` setting.", }, :http_proxy_password =>{ :default => "none", :hook => proc do |value| if Puppet.settings[:http_proxy_password] =~ /[@!# \/]/ raise "Passwords set in the http_proxy_password setting must be valid as part of a URL, and any reserved characters must be URL-encoded. We received: #{value}" end end, :desc => "The password for the user of an authenticated HTTP proxy. Requires the `http_proxy_user` setting. Note that passwords must be valid when used as part of a URL. If a password contains any characters with special meanings in URLs (as specified by RFC 3986 section 2.2), they must be URL-encoded. (For example, `#` would become `%23`.)", }, :http_keepalive_timeout => { :default => "4s", :type => :duration, :desc => "The maximum amount of time a persistent HTTP connection can remain idle in the connection pool, before it is closed. This timeout should be shorter than the keepalive timeout used on the HTTP server, e.g. Apache KeepAliveTimeout directive. #{AS_DURATION}" }, :http_debug => { :default => false, :type => :boolean, :desc => "Whether to write HTTP request and responses to stderr. This should never be used in a production environment." }, :http_connect_timeout => { :default => "2m", :type => :duration, :desc => "The maximum amount of time to wait when establishing an HTTP connection. The default value is 2 minutes. #{AS_DURATION}", }, :http_read_timeout => { :type => :duration, :desc => "The time to wait for one block to be read from an HTTP connection. If nothing is read after the elapsed interval then the connection will be closed. The default value is unlimited. #{AS_DURATION}", }, :filetimeout => { :default => "15s", :type => :duration, :desc => "The minimum time to wait between checking for updates in configuration files. This timeout determines how quickly Puppet checks whether a file (such as manifests or templates) has changed on disk. #{AS_DURATION}", }, :environment_timeout => { :default => "unlimited", :type => :ttl, :desc => "The time to live for a cached environment. #{AS_DURATION} This setting can also be set to `unlimited`, which causes the environment to be cached until the master is restarted." }, :environment_data_provider => { :default => "none", :desc => "The name of a registered environment data provider. The two built in and registered providers are 'none' (no environment specific data), and 'function' (environment specific data obtained by calling the function 'environment::data()'). Other environment data providers may be registered in modules on the module path. For such custom data providers see the respective module documentation." }, :prerun_command => { :default => "", :desc => "A command to run before every agent run. If this command returns a non-zero return code, the entire Puppet run will fail.", }, :postrun_command => { :default => "", :desc => "A command to run after every agent run. If this command returns a non-zero return code, the entire Puppet run will be considered to have failed, even though it might have performed work during the normal run.", }, :freeze_main => { :default => false, :type => :boolean, :desc => "Freezes the 'main' class, disallowing any code to be added to it. This essentially means that you can't have any code outside of a node, class, or definition other than in the site manifest.", } ) Puppet.define_settings(:module_tool, :module_repository => { :default => 'https://forgeapi.puppetlabs.com', :desc => "The module repository", }, :module_working_dir => { :default => '$vardir/puppet-module', :desc => "The directory into which module tool data is stored", }, :module_skeleton_dir => { :default => '$module_working_dir/skeleton', :desc => "The directory which the skeleton for module tool generate is stored.", }, :forge_authorization => { :default => nil, :desc => "The authorization key to connect to the Puppet Forge. Leave blank for unauthorized or license based connections", }, :module_groups => { :default => nil, :desc => "Extra module groups to request from the Puppet Forge", } ) Puppet.define_settings( :main, # We have to downcase the fqdn, because the current ssl stuff (as oppsed to in master) doesn't have good facilities for # manipulating naming. :certname => { :default => lambda { Puppet::Settings.default_certname.downcase }, :desc => "The name to use when handling certificates. When a node requests a certificate from the CA puppet master, it uses the value of the `certname` setting as its requested Subject CN. This is the name used when managing a node's permissions in [auth.conf](http://docs.puppetlabs.com/puppet/latest/reference/config_file_auth.html). In most cases, it is also used as the node's name when matching [node definitions](http://docs.puppetlabs.com/puppet/latest/reference/lang_node_definitions.html) and requesting data from an ENC. (This can be changed with the `node_name_value` and `node_name_fact` settings, although you should only do so if you have a compelling reason.) A node's certname is available in Puppet manifests as `$trusted['certname']`. (See [Facts and Built-In Variables](http://docs.puppetlabs.com/puppet/latest/reference/lang_facts_and_builtin_vars.html) for more details.) * For best compatibility, you should limit the value of `certname` to only use letters, numbers, periods, underscores, and dashes. (That is, it should match `/\A[a-z0-9._-]+\Z/`.) * The special value `ca` is reserved, and can't be used as the certname for a normal node. Defaults to the node's fully qualified domain name.", :hook => proc { |value| raise(ArgumentError, "Certificate names must be lower case; see #1168") unless value == value.downcase }}, :dns_alt_names => { :default => '', :desc => < { :default => "$confdir/csr_attributes.yaml", :type => :file, :desc => < { :default => "$ssldir/certs", :type => :directory, :mode => "0755", :owner => "service", :group => "service", :desc => "The certificate directory." }, :ssldir => { :default => "$confdir/ssl", :type => :directory, :mode => "0771", :owner => "service", :group => "service", :desc => "Where SSL certificates are kept." }, :publickeydir => { :default => "$ssldir/public_keys", :type => :directory, :mode => "0755", :owner => "service", :group => "service", :desc => "The public key directory." }, :requestdir => { :default => "$ssldir/certificate_requests", :type => :directory, :mode => "0755", :owner => "service", :group => "service", :desc => "Where host certificate requests are stored." }, :privatekeydir => { :default => "$ssldir/private_keys", :type => :directory, :mode => "0750", :owner => "service", :group => "service", :desc => "The private key directory." }, :privatedir => { :default => "$ssldir/private", :type => :directory, :mode => "0750", :owner => "service", :group => "service", :desc => "Where the client stores private certificate information." }, :passfile => { :default => "$privatedir/password", :type => :file, :mode => "0640", :owner => "service", :group => "service", :desc => "Where puppet agent stores the password for its private key. Generally unused." }, :hostcsr => { :default => "$ssldir/csr_$certname.pem", :type => :file, :mode => "0644", :owner => "service", :group => "service", :desc => "Where individual hosts store and look for their certificate requests." }, :hostcert => { :default => "$certdir/$certname.pem", :type => :file, :mode => "0644", :owner => "service", :group => "service", :desc => "Where individual hosts store and look for their certificates." }, :hostprivkey => { :default => "$privatekeydir/$certname.pem", :type => :file, :mode => "0640", :owner => "service", :group => "service", :desc => "Where individual hosts store and look for their private key." }, :hostpubkey => { :default => "$publickeydir/$certname.pem", :type => :file, :mode => "0644", :owner => "service", :group => "service", :desc => "Where individual hosts store and look for their public key." }, :localcacert => { :default => "$certdir/ca.pem", :type => :file, :mode => "0644", :owner => "service", :group => "service", :desc => "Where each client stores the CA certificate." }, :ssl_client_ca_auth => { :type => :file, :mode => "0644", :owner => "service", :group => "service", :desc => "Certificate authorities who issue server certificates. SSL servers will not be considered authentic unless they possess a certificate issued by an authority listed in this file. If this setting has no value then the Puppet master's CA certificate (localcacert) will be used." }, :ssl_server_ca_auth => { :type => :file, :mode => "0644", :owner => "service", :group => "service", :desc => "Certificate authorities who issue client certificates. SSL clients will not be considered authentic unless they possess a certificate issued by an authority listed in this file. If this setting has no value then the Puppet master's CA certificate (localcacert) will be used." }, :hostcrl => { :default => "$ssldir/crl.pem", :type => :file, :mode => "0644", :owner => "service", :group => "service", :desc => "Where the host's certificate revocation list can be found. This is distinct from the certificate authority's CRL." }, :certificate_revocation => { :default => true, :type => :boolean, :desc => "Whether certificate revocation should be supported by downloading a Certificate Revocation List (CRL) to all clients. If enabled, CA chaining will almost definitely not work.", }, :digest_algorithm => { :default => 'md5', :type => :enum, :values => ["md5", "sha256"], :desc => 'Which digest algorithm to use for file resources and the filebucket. Valid values are md5, sha256. Default is md5.', } ) define_settings( :ca, :ca_name => { :default => "Puppet CA: $certname", :desc => "The name to use the Certificate Authority certificate.", }, :cadir => { :default => "$ssldir/ca", :type => :directory, :owner => "service", :group => "service", :mode => "0755", :desc => "The root directory for the certificate authority." }, :cacert => { :default => "$cadir/ca_crt.pem", :type => :file, :owner => "service", :group => "service", :mode => "0644", :desc => "The CA certificate." }, :cakey => { :default => "$cadir/ca_key.pem", :type => :file, :owner => "service", :group => "service", :mode => "0640", :desc => "The CA private key." }, :capub => { :default => "$cadir/ca_pub.pem", :type => :file, :owner => "service", :group => "service", :mode => "0644", :desc => "The CA public key." }, :cacrl => { :default => "$cadir/ca_crl.pem", :type => :file, :owner => "service", :group => "service", :mode => "0644", :desc => "The certificate revocation list (CRL) for the CA. Will be used if present but otherwise ignored.", }, :caprivatedir => { :default => "$cadir/private", :type => :directory, :owner => "service", :group => "service", :mode => "0750", :desc => "Where the CA stores private certificate information." }, :csrdir => { :default => "$cadir/requests", :type => :directory, :owner => "service", :group => "service", :mode => "0755", :desc => "Where the CA stores certificate requests" }, :signeddir => { :default => "$cadir/signed", :type => :directory, :owner => "service", :group => "service", :mode => "0755", :desc => "Where the CA stores signed certificates." }, :capass => { :default => "$caprivatedir/ca.pass", :type => :file, :owner => "service", :group => "service", :mode => "0640", :desc => "Where the CA stores the password for the private key." }, :serial => { :default => "$cadir/serial", :type => :file, :owner => "service", :group => "service", :mode => "0644", :desc => "Where the serial number for certificates is stored." }, :autosign => { :default => "$confdir/autosign.conf", :type => :autosign, :desc => "Whether (and how) to autosign certificate requests. This setting is only relevant on a puppet master acting as a certificate authority (CA). Valid values are true (autosigns all certificate requests; not recommended), false (disables autosigning certificates), or the absolute path to a file. The file specified in this setting may be either a **configuration file** or a **custom policy executable.** Puppet will automatically determine what it is: If the Puppet user (see the `user` setting) can execute the file, it will be treated as a policy executable; otherwise, it will be treated as a config file. If a custom policy executable is configured, the CA puppet master will run it every time it receives a CSR. The executable will be passed the subject CN of the request _as a command line argument,_ and the contents of the CSR in PEM format _on stdin._ It should exit with a status of 0 if the cert should be autosigned and non-zero if the cert should not be autosigned. If a certificate request is not autosigned, it will persist for review. An admin user can use the `puppet cert sign` command to manually sign it, or can delete the request. For info on autosign configuration files, see [the guide to Puppet's config files](http://docs.puppetlabs.com/guides/configuring.html).", }, :allow_duplicate_certs => { :default => false, :type => :boolean, :desc => "Whether to allow a new certificate request to overwrite an existing certificate.", }, :ca_ttl => { :default => "5y", :type => :duration, :desc => "The default TTL for new certificates. #{AS_DURATION}" }, :req_bits => { :default => 4096, :desc => "The bit length of the certificates.", }, :keylength => { :default => 4096, :desc => "The bit length of keys.", }, :cert_inventory => { :default => "$cadir/inventory.txt", :type => :file, :mode => "0644", :owner => "service", :group => "service", :desc => "The inventory file. This is a text file to which the CA writes a complete listing of all certificates." } ) # Define the config default. define_settings(:application, :config_file_name => { :type => :string, :default => Puppet::Settings.default_config_file_name, :desc => "The name of the puppet config file.", }, :config => { :type => :file, :default => "$confdir/${config_file_name}", :desc => "The configuration file for the current puppet application.", }, :pidfile => { :type => :file, :default => "$rundir/${run_mode}.pid", :desc => "The file containing the PID of a running process. This file is intended to be used by service management frameworks and monitoring systems to determine if a puppet process is still in the process table.", }, :bindaddress => { :default => "0.0.0.0", :desc => "The address a listening server should bind to.", } ) define_settings(:environment, :manifest => { :default => nil, :type => :file_or_directory, :desc => "The entry-point manifest for puppet master. This can be one file or a directory of manifests to be evaluated in alphabetical order. Puppet manages this path as a directory if one exists or if the path ends with a / or \\. Setting a global value for `manifest` in puppet.conf is not allowed (but it can be overridden from them commandline). Please use directory environments instead. If you need to use something other than the environment's `manifests` directory as the main manifest, you can set `manifest` in environment.conf. For more info, see http://docs.puppetlabs.com/puppet/latest/reference/environments.html", }, :modulepath => { :default => "", :type => :path, :desc => "The search path for modules, as a list of directories separated by the system path separator character. (The POSIX path separator is ':', and the Windows path separator is ';'.) Setting a global value for `modulepath` in puppet.conf is not allowed (but it can be overridden from the commandline). Please use directory environments instead. If you need to use something other than the default modulepath of `:$basemodulepath`, you can set `modulepath` in environment.conf. For more info, see http://docs.puppetlabs.com/puppet/latest/reference/environments.html", }, :config_version => { :default => "", :desc => "How to determine the configuration version. By default, it will be the time that the configuration is parsed, but you can provide a shell script to override how the version is determined. The output of this script will be added to every log message in the reports, allowing you to correlate changes on your hosts to the source version on the server. Setting a global value for config_version in puppet.conf is not allowed (but it can be overridden from the commandline). Please set a per-environment value in environment.conf instead. For more info, see http://docs.puppetlabs.com/puppet/latest/reference/environments.html", }, ) define_settings(:master, :user => { :default => "puppet", :desc => "The user puppet master should run as.", }, :group => { :default => "puppet", :desc => "The group puppet master should run as.", }, :default_manifest => { :default => "./manifests", :type => :string, :desc => "The default main manifest for directory environments. Any environment that doesn't set the `manifest` setting in its `environment.conf` file will use this manifest. This setting's value can be an absolute or relative path. An absolute path will make all environments default to the same main manifest; a relative path will allow each environment to use its own manifest, and Puppet will resolve the path relative to each environment's main directory. In either case, the path can point to a single file or to a directory of manifests to be evaluated in alphabetical order.", }, :disable_per_environment_manifest => { :default => false, :type => :boolean, :desc => "Whether to disallow an environment-specific main manifest. When set to `true`, Puppet will use the manifest specified in the `default_manifest` setting for all environments. If an environment specifies a different main manifest in its `environment.conf` file, catalog requests for that environment will fail with an error. This setting requires `default_manifest` to be set to an absolute path.", :hook => proc do |value| if value && !Pathname.new(Puppet[:default_manifest]).absolute? raise(Puppet::Settings::ValidationError, "The 'default_manifest' setting must be set to an absolute path when 'disable_per_environment_manifest' is true") end end, }, :code => { :default => "", :desc => "Code to parse directly. This is essentially only used by `puppet`, and should only be set if you're writing your own Puppet executable.", }, :masterhttplog => { :default => "$logdir/masterhttp.log", :type => :file, :owner => "service", :group => "service", :mode => "0660", :create => true, :desc => "Where the puppet master web server saves its access log. This is only used when running a WEBrick puppet master. When puppet master is running under a Rack server like Passenger, that web server will have its own logging behavior." }, :masterport => { :default => 8140, :desc => "The port for puppet master traffic. For puppet master, this is the port to listen on; for puppet agent, this is the port to make requests on. Both applications use this setting to get the port.", }, :node_name => { :default => "cert", :desc => "How the puppet master determines the client's identity and sets the 'hostname', 'fqdn' and 'domain' facts for use in the manifest, in particular for determining which 'node' statement applies to the client. Possible values are 'cert' (use the subject's CN in the client's certificate) and 'facter' (use the hostname that the client reported in its facts)", }, :bucketdir => { :default => "$vardir/bucket", :type => :directory, :mode => "0750", :owner => "service", :group => "service", :desc => "Where FileBucket files are stored." }, :rest_authconfig => { :default => "$confdir/auth.conf", :type => :file, :desc => "The configuration file that defines the rights to the different rest indirections. This can be used as a fine-grained authorization system for `puppet master`.", }, :ca => { :default => true, :type => :boolean, :desc => "Whether the master should function as a certificate authority.", }, :trusted_oid_mapping_file => { :default => "$confdir/custom_trusted_oid_mapping.yaml", :type => :file, :desc => "File that provides mapping between custom SSL oids and user-friendly names" }, :basemodulepath => { :default => "$confdir/modules#{File::PATH_SEPARATOR}/usr/share/puppet/modules", :type => :path, :desc => "The search path for **global** modules. Should be specified as a list of directories separated by the system path separator character. (The POSIX path separator is ':', and the Windows path separator is ';'.) These are the modules that will be used by _all_ environments. Note that the `modules` directory of the active environment will have priority over any global directories. For more info, see http://docs.puppetlabs.com/puppet/latest/reference/environments.html", }, :ssl_client_header => { :default => "HTTP_X_CLIENT_DN", :desc => "The header containing an authenticated client's SSL DN. This header must be set by the proxy to the authenticated client's SSL DN (e.g., `/CN=puppet.puppetlabs.com`). Puppet will parse out the Common Name (CN) from the Distinguished Name (DN) and use the value of the CN field for authorization. Note that the name of the HTTP header gets munged by the web server common gateway inteface: an `HTTP_` prefix is added, dashes are converted to underscores, and all letters are uppercased. Thus, to use the `X-Client-DN` header, this setting should be `HTTP_X_CLIENT_DN`.", }, :ssl_client_verify_header => { :default => "HTTP_X_CLIENT_VERIFY", :desc => "The header containing the status message of the client verification. This header must be set by the proxy to 'SUCCESS' if the client successfully authenticated, and anything else otherwise. Note that the name of the HTTP header gets munged by the web server common gateway inteface: an `HTTP_` prefix is added, dashes are converted to underscores, and all letters are uppercased. Thus, to use the `X-Client-Verify` header, this setting should be `HTTP_X_CLIENT_VERIFY`.", }, # To make sure this directory is created before we try to use it on the server, we need # it to be in the server section (#1138). :yamldir => { :default => "$vardir/yaml", :type => :directory, :owner => "service", :group => "service", :mode => "0750", :desc => "The directory in which YAML data is stored, usually in a subdirectory."}, :server_datadir => { :default => "$vardir/server_data", :type => :directory, :owner => "service", :group => "service", :mode => "0750", :desc => "The directory in which serialized data is stored, usually in a subdirectory."}, :reports => { :default => "store", :desc => "The list of report handlers to use. When using multiple report handlers, their names should be comma-separated, with whitespace allowed. (For example, `reports = http, store`.) This setting is relevant to puppet master and puppet apply. The puppet master will call these report handlers with the reports it receives from agent nodes, and puppet apply will call them with its own report. (In all cases, the node applying the catalog must have `report = true`.) See the report reference for information on the built-in report handlers; custom report handlers can also be loaded from modules. (Report handlers are loaded from the lib directory, at `puppet/reports/NAME.rb`.)", }, :reportdir => { :default => "$vardir/reports", :type => :directory, :mode => "0750", :owner => "service", :group => "service", :desc => "The directory in which to store reports. Each node gets a separate subdirectory in this directory. This setting is only used when the `store` report processor is enabled (see the `reports` setting)."}, :reporturl => { :default => "http://localhost:3000/reports/upload", :desc => "The URL that reports should be forwarded to. This setting is only used when the `http` report processor is enabled (see the `reports` setting).", }, :fileserverconfig => { :default => "$confdir/fileserver.conf", :type => :file, :desc => "Where the fileserver configuration is stored.", }, :strict_hostname_checking => { :default => false, :desc => "Whether to only search for the complete hostname as it is in the certificate when searching for node information in the catalogs.", } ) define_settings(:device, :devicedir => { :default => "$vardir/devices", :type => :directory, :mode => "0750", :desc => "The root directory of devices' $vardir.", }, :deviceconfig => { :default => "$confdir/device.conf", :desc => "Path to the device config file for puppet device.", } ) define_settings(:agent, :node_name_value => { :default => "$certname", :desc => "The explicit value used for the node name for all requests the agent makes to the master. WARNING: This setting is mutually exclusive with node_name_fact. Changing this setting also requires changes to the default auth.conf configuration on the Puppet Master. Please see http://links.puppetlabs.com/node_name_value for more information." }, :node_name_fact => { :default => "", :desc => "The fact name used to determine the node name used for all requests the agent makes to the master. WARNING: This setting is mutually exclusive with node_name_value. Changing this setting also requires changes to the default auth.conf configuration on the Puppet Master. Please see http://links.puppetlabs.com/node_name_fact for more information.", :hook => proc do |value| if !value.empty? and Puppet[:node_name_value] != Puppet[:certname] raise "Cannot specify both the node_name_value and node_name_fact settings" end end }, :statefile => { :default => "$statedir/state.yaml", :type => :file, :mode => "0660", :desc => "Where puppet agent and puppet master store state associated with the running configuration. In the case of puppet master, this file reflects the state discovered through interacting with clients." }, :clientyamldir => { :default => "$vardir/client_yaml", :type => :directory, :mode => "0750", :desc => "The directory in which client-side YAML data is stored." }, :client_datadir => { :default => "$vardir/client_data", :type => :directory, :mode => "0750", :desc => "The directory in which serialized data is stored on the client." }, :classfile => { :default => "$statedir/classes.txt", :type => :file, :owner => "root", :mode => "0640", :desc => "The file in which puppet agent stores a list of the classes associated with the retrieved configuration. Can be loaded in the separate `puppet` executable using the `--loadclasses` option."}, :resourcefile => { :default => "$statedir/resources.txt", :type => :file, :owner => "root", :mode => "0640", :desc => "The file in which puppet agent stores a list of the resources associated with the retrieved configuration." }, :puppetdlog => { :default => "$logdir/puppetd.log", :type => :file, :owner => "root", :mode => "0640", :desc => "The fallback log file. This is only used when the `--logdest` option is not specified AND Puppet is running on an operating system where both the POSIX syslog service and the Windows Event Log are unavailable. (Currently, no supported operating systems match that description.) Despite the name, both puppet agent and puppet master will use this file as the fallback logging destination. For control over logging destinations, see the `--logdest` command line option in the manual pages for puppet master, puppet agent, and puppet apply. You can see man pages by running `puppet --help`, or read them online at http://docs.puppetlabs.com/references/latest/man/." }, :server => { :default => "puppet", :desc => "The puppet master server to which the puppet agent should connect." }, :use_srv_records => { :default => false, :type => :boolean, :desc => "Whether the server will search for SRV records in DNS for the current domain.", }, :srv_domain => { :default => lambda { Puppet::Settings.domain_fact }, :desc => "The domain which will be queried to find the SRV records of servers to use.", }, :ignoreschedules => { :default => false, :type => :boolean, :desc => "Boolean; whether puppet agent should ignore schedules. This is useful for initial puppet agent runs.", }, :default_schedules => { :default => true, :type => :boolean, :desc => "Boolean; whether to generate the default schedule resources. Setting this to false is useful for keeping external report processors clean of skipped schedule resources.", }, :noop => { :default => false, :type => :boolean, :desc => "Whether to apply catalogs in noop mode, which allows Puppet to partially simulate a normal run. This setting affects puppet agent and puppet apply. When running in noop mode, Puppet will check whether each resource is in sync, like it does when running normally. However, if a resource attribute is not in the desired state (as declared in the catalog), Puppet will take no action, and will instead report the changes it _would_ have made. These simulated changes will appear in the report sent to the puppet master, or be shown on the console if running puppet agent or puppet apply in the foreground. The simulated changes will not send refresh events to any subscribing or notified resources, although Puppet will log that a refresh event _would_ have been sent. **Important note:** [The `noop` metaparameter](http://docs.puppetlabs.com/references/latest/metaparameter.html#noop) allows you to apply individual resources in noop mode, and will override the global value of the `noop` setting. This means a resource with `noop => false` _will_ be changed if necessary, even when running puppet agent with `noop = true` or `--noop`. (Conversely, a resource with `noop => true` will only be simulated, even when noop mode is globally disabled.)", }, :runinterval => { :default => "30m", :type => :duration, :desc => "How often puppet agent applies the catalog. Note that a runinterval of 0 means \"run continuously\" rather than \"never run.\" If you want puppet agent to never run, you should start it with the `--no-client` option. #{AS_DURATION}", }, :ca_server => { :default => "$server", :desc => "The server to use for certificate authority requests. It's a separate server because it cannot and does not need to horizontally scale.", }, :ca_port => { :default => "$masterport", :desc => "The port to use for the certificate authority.", }, :preferred_serialization_format => { :default => "pson", :desc => "The preferred means of serializing ruby instances for passing over the wire. This won't guarantee that all instances will be serialized using this method, since not all classes can be guaranteed to support this format, but it will be used for all classes that support it.", }, :agent_catalog_run_lockfile => { :default => "$statedir/agent_catalog_run.lock", :type => :string, # (#2888) Ensure this file is not added to the settings catalog. :desc => "A lock file to indicate that a puppet agent catalog run is currently in progress. The file contains the pid of the process that holds the lock on the catalog run.", }, :agent_disabled_lockfile => { :default => "$statedir/agent_disabled.lock", :type => :file, :desc => "A lock file to indicate that puppet agent runs have been administratively disabled. File contains a JSON object with state information.", }, :usecacheonfailure => { :default => true, :type => :boolean, :desc => "Whether to use the cached configuration when the remote configuration will not compile. This option is useful for testing new configurations, where you want to fix the broken configuration rather than reverting to a known-good one.", }, :use_cached_catalog => { :default => false, :type => :boolean, :desc => "Whether to only use the cached catalog rather than compiling a new catalog on every run. Puppet can be run with this enabled by default and then selectively disabled when a recompile is desired.", }, :ignoremissingtypes => { :default => false, :type => :boolean, :desc => "Skip searching for classes and definitions that were missing during a prior compilation. The list of missing objects is maintained per-environment and persists until the environment is cleared or the master is restarted.", }, :ignorecache => { :default => false, :type => :boolean, :desc => "Ignore cache and always recompile the configuration. This is useful for testing new configurations, where the local cache may in fact be stale even if the timestamps are up to date - if the facts change or if the server changes.", }, :splaylimit => { :default => "$runinterval", :type => :duration, :desc => "The maximum time to delay before runs. Defaults to being the same as the run interval. #{AS_DURATION}", }, :splay => { :default => false, :type => :boolean, :desc => "Whether to sleep for a pseudo-random (but consistent) amount of time before a run.", }, :clientbucketdir => { :default => "$vardir/clientbucket", :type => :directory, :mode => "0750", :desc => "Where FileBucket files are stored locally." }, :configtimeout => { :default => "2m", :type => :duration, :desc => "How long the client should wait for the configuration to be retrieved before considering it a failure. This setting is deprecated and has been replaced by http_connect_timeout and http_read_timeout. #{AS_DURATION}", :deprecated => :completely, :hook => proc do |value| Puppet[:http_connect_timeout] = value Puppet[:http_read_timeout] = value end }, :report_server => { :default => "$server", :desc => "The server to send transaction reports to.", }, :report_port => { :default => "$masterport", :desc => "The port to communicate with the report_server.", }, :report => { :default => true, :type => :boolean, :desc => "Whether to send reports after every transaction.", }, :lastrunfile => { :default => "$statedir/last_run_summary.yaml", :type => :file, :mode => "0644", :desc => "Where puppet agent stores the last run report summary in yaml format." }, :lastrunreport => { :default => "$statedir/last_run_report.yaml", :type => :file, :mode => "0640", :desc => "Where puppet agent stores the last run report in yaml format." }, :graph => { :default => false, :type => :boolean, :desc => "Whether to create dot graph files for the different configuration graphs. These dot files can be interpreted by tools like OmniGraffle or dot (which is part of ImageMagick).", }, :graphdir => { :default => "$statedir/graphs", :type => :directory, :desc => "Where to store dot-outputted graphs.", }, :waitforcert => { :default => "2m", :type => :duration, :desc => "How frequently puppet agent should ask for a signed certificate. When starting for the first time, puppet agent will submit a certificate signing request (CSR) to the server named in the `ca_server` setting (usually the puppet master); this may be autosigned, or may need to be approved by a human, depending on the CA server's configuration. Puppet agent cannot apply configurations until its approved certificate is available. Since the certificate may or may not be available immediately, puppet agent will repeatedly try to fetch it at this interval. You can turn off waiting for certificates by specifying a time of 0, in which case puppet agent will exit if it cannot get a cert. #{AS_DURATION}", }, :ordering => { :type => :enum, :values => ["manifest", "title-hash", "random"], :default => "manifest", :desc => "How unrelated resources should be ordered when applying a catalog. Allowed values are `title-hash`, `manifest`, and `random`. This setting affects puppet agent and puppet apply, but not puppet master. * `manifest` (the default) will use the order in which the resources were declared in their manifest files. * `title-hash` (the default in 3.x) will order resources randomly, but will use the same order across runs and across nodes. It is only of value if you're migrating from 3.x and have errors running with `manifest`. * `random` will order resources randomly and change their order with each run. This can work like a fuzzer for shaking out undeclared dependencies. Regardless of this setting's value, Puppet will always obey explicit dependencies set with the before/require/notify/subscribe metaparameters and the `->`/`~>` chaining arrows; this setting only affects the relative ordering of _unrelated_ resources." } ) define_settings(:inspect, :archive_files => { :type => :boolean, :default => false, :desc => "During an inspect run, whether to archive files whose contents are audited to a file bucket.", }, :archive_file_server => { :default => "$server", :desc => "During an inspect run, the file bucket server to archive files to if archive_files is set.", } ) # Plugin information. define_settings( :main, :plugindest => { :type => :directory, :default => "$libdir", :desc => "Where Puppet should store plugins that it pulls down from the central server.", }, :pluginsource => { :default => "puppet:///plugins", :desc => "From where to retrieve plugins. The standard Puppet `file` type is used for retrieval, so anything that is a valid file source can be used here.", }, :pluginfactdest => { :type => :directory, :default => "$vardir/facts.d", :desc => "Where Puppet should store external facts that are being handled by pluginsync", }, :pluginfactsource => { :default => "puppet:///pluginfacts", :desc => "Where to retrieve external facts for pluginsync", }, :pluginsync => { :default => true, :type => :boolean, :desc => "Whether plugins should be synced with the central server.", }, :pluginsignore => { :default => ".svn CVS .git", :desc => "What files to ignore when pulling down plugins.", } ) # Central fact information. define_settings( :main, :factpath => { :type => :path, :default => "$vardir/lib/facter#{File::PATH_SEPARATOR}$vardir/facts", :desc => "Where Puppet should look for facts. Multiple directories should be separated by the system path separator character. (The POSIX path separator is ':', and the Windows path separator is ';'.)", :call_hook => :on_initialize_and_write, # Call our hook with the default value, so we always get the value added to facter. :hook => proc do |value| paths = value.split(File::PATH_SEPARATOR) Facter.search(*paths) end } ) define_settings( :transaction, :tags => { :default => "", :desc => "Tags to use to find resources. If this is set, then only resources tagged with the specified tags will be applied. Values must be comma-separated.", }, :evaltrace => { :default => false, :type => :boolean, :desc => "Whether each resource should log when it is being evaluated. This allows you to interactively see exactly what is being done.", }, :summarize => { :default => false, :type => :boolean, :desc => "Whether to print a transaction summary.", } ) define_settings( :main, :external_nodes => { :default => "none", :desc => "An external command that can produce node information. The command's output must be a YAML dump of a hash, and that hash must have a `classes` key and/or a `parameters` key, where `classes` is an array or hash and `parameters` is a hash. For unknown nodes, the command should exit with a non-zero exit code. This command makes it straightforward to store your node mapping information in other data sources like databases.", } ) define_settings( :ldap, :ldapssl => { :default => false, :type => :boolean, :desc => "Whether SSL should be used when searching for nodes. Defaults to false because SSL usually requires certificates to be set up on the client side.", }, :ldaptls => { :default => false, :type => :boolean, :desc => "Whether TLS should be used when searching for nodes. Defaults to false because TLS usually requires certificates to be set up on the client side.", }, :ldapserver => { :default => "ldap", :desc => "The LDAP server. Only used if `node_terminus` is set to `ldap`.", }, :ldapport => { :default => 389, :desc => "The LDAP port. Only used if `node_terminus` is set to `ldap`.", }, :ldapstring => { :default => "(&(objectclass=puppetClient)(cn=%s))", :desc => "The search string used to find an LDAP node.", }, :ldapclassattrs => { :default => "puppetclass", :desc => "The LDAP attributes to use to define Puppet classes. Values should be comma-separated.", }, :ldapstackedattrs => { :default => "puppetvar", :desc => "The LDAP attributes that should be stacked to arrays by adding the values in all hierarchy elements of the tree. Values should be comma-separated.", }, :ldapattrs => { :default => "all", :desc => "The LDAP attributes to include when querying LDAP for nodes. All returned attributes are set as variables in the top-level scope. Multiple values should be comma-separated. The value 'all' returns all attributes.", }, :ldapparentattr => { :default => "parentnode", :desc => "The attribute to use to define the parent node.", }, :ldapuser => { :default => "", :desc => "The user to use to connect to LDAP. Must be specified as a full DN.", }, :ldappassword => { :default => "", :desc => "The password to use to connect to LDAP.", }, :ldapbase => { :default => "", :desc => "The search base for LDAP searches. It's impossible to provide a meaningful default here, although the LDAP libraries might have one already set. Generally, it should be the 'ou=Hosts' branch under your main directory.", } ) define_settings(:master, :storeconfigs => { :default => false, :type => :boolean, :desc => "Whether to store each client's configuration, including catalogs, facts, and related data. This also enables the import and export of resources in the Puppet language - a mechanism for exchange resources between nodes. By default this uses the 'puppetdb' backend. You can adjust the backend using the storeconfigs_backend setting.", # Call our hook with the default value, so we always get the libdir set. :call_hook => :on_initialize_and_write, :hook => proc do |value| require 'puppet/node' require 'puppet/node/facts' if value Puppet::Resource::Catalog.indirection.cache_class = :store_configs Puppet.settings.override_default(:catalog_cache_terminus, :store_configs) Puppet::Node::Facts.indirection.cache_class = :store_configs Puppet::Resource.indirection.terminus_class = :store_configs end end }, :storeconfigs_backend => { :type => :terminus, :default => "puppetdb", :desc => "Configure the backend terminus used for StoreConfigs. By default, this uses the PuppetDB store, which must be installed and configured before turning on StoreConfigs." } ) define_settings(:parser, :max_errors => { :default => 10, :desc => <<-'EOT' Sets the max number of logged/displayed parser validation errors in case multiple errors have been detected. A value of 0 is the same as a value of 1; a minimum of one error is always raised. The count is per manifest. EOT }, :max_warnings => { :default => 10, :desc => <<-'EOT' Sets the max number of logged/displayed parser validation warnings in case multiple warnings have been detected. A value of 0 blocks logging of warnings. The count is per manifest. EOT }, :max_deprecations => { :default => 10, :desc => <<-'EOT' Sets the max number of logged/displayed parser validation deprecation warnings in case multiple deprecation warnings have been detected. A value of 0 blocks the logging of deprecation warnings. The count is per manifest. EOT }, :strict_variables => { :default => false, :type => :boolean, :desc => <<-'EOT' Makes the parser raise errors when referencing unknown variables. (This does not affect referencing variables that are explicitly set to undef). EOT } ) define_settings(:puppetdoc, :document_all => { :default => false, :type => :boolean, :desc => "Whether to document all resources when using `puppet doc` to generate manifest documentation.", } ) end diff --git a/lib/puppet/util/autoload.rb b/lib/puppet/util/autoload.rb index 8bba84c89..e788df75a 100644 --- a/lib/puppet/util/autoload.rb +++ b/lib/puppet/util/autoload.rb @@ -1,221 +1,221 @@ require 'pathname' require 'puppet/util/rubygems' require 'puppet/util/warnings' require 'puppet/util/methodhelper' # Autoload paths, either based on names or all at once. class Puppet::Util::Autoload include Puppet::Util::MethodHelper @loaded = {} class << self attr_accessor :loaded def gem_source @gem_source ||= Puppet::Util::RubyGems::Source.new end # Has a given path been loaded? This is used for testing whether a # changed file should be loaded or just ignored. This is only # used in network/client/master, when downloading plugins, to # see if a given plugin is currently loaded and thus should be # reloaded. def loaded?(path) path = cleanpath(path).chomp('.rb') loaded.include?(path) end # Save the fact that a given path has been loaded. This is so # we can load downloaded plugins if they've already been loaded # into memory. def mark_loaded(name, file) name = cleanpath(name).chomp('.rb') ruby_file = name + ".rb" $LOADED_FEATURES << ruby_file unless $LOADED_FEATURES.include?(ruby_file) loaded[name] = [file, File.mtime(file)] end def changed?(name) name = cleanpath(name).chomp('.rb') return true unless loaded.include?(name) file, old_mtime = loaded[name] environment = Puppet.lookup(:current_environment) return true unless file == get_file(name, environment) begin old_mtime.to_i != File.mtime(file).to_i rescue Errno::ENOENT true end end # Load a single plugin by name. We use 'load' here so we can reload a # given plugin. def load_file(name, env) file = get_file(name.to_s, env) return false unless file begin mark_loaded(name, file) Kernel.load file return true rescue SystemExit,NoMemoryError raise rescue Exception => detail message = "Could not autoload #{name}: #{detail}" Puppet.log_exception(detail, message) raise Puppet::Error, message, detail.backtrace end end def loadall(path, env = nil) # Load every instance of everything we can find. files_to_load(path, env).each do |file| name = file.chomp(".rb") load_file(name, env) unless loaded?(name) end end def reload_changed loaded.keys.each { |file| load_file(file, nil) if changed?(file) } end # Get the correct file to load for a given path # returns nil if no file is found def get_file(name, env) name = name + '.rb' unless name =~ /\.rb$/ path = search_directories(env).find { |dir| Puppet::FileSystem.exist?(File.join(dir, name)) } path and File.join(path, name) end def files_to_load(path, env = nil) search_directories(env).map {|dir| files_in_dir(dir, path) }.flatten.uniq end def files_in_dir(dir, path) dir = Pathname.new(File.expand_path(dir)) Dir.glob(File.join(dir, path, "*.rb")).collect do |file| Pathname.new(file).relative_path_from(dir).to_s end end def module_directories(env) # We're using a per-thread cache of module directories so that we don't # scan the filesystem each time we try to load something. This is reset # at the beginning of compilation and at the end of an agent run. $env_module_directories ||= {} # This is a little bit of a hack. Basically, the autoloader is being # called indirectly during application bootstrapping when we do things # such as check "features". However, during bootstrapping, we haven't # yet parsed all of the command line parameters nor the config files, # and thus we don't yet know with certainty what the module path is. # This should be irrelevant during bootstrapping, because anything that # we are attempting to load during bootstrapping should be something # that we ship with puppet, and thus the module path is irrelevant. # # In the long term, I think the way that we want to handle this is to # have the autoloader ignore the module path in all cases where it is # not specifically requested (e.g., by a constructor param or # something)... because there are very few cases where we should # actually be loading code from the module path. However, until that # happens, we at least need a way to prevent the autoloader from # attempting to access the module path before it is initialized. For # now we are accomplishing that by calling the # "app_defaults_initialized?" method on the main puppet Settings object. # --cprice 2012-03-16 if Puppet.settings.app_defaults_initialized? env ||= Puppet.lookup(:environments).get(Puppet[:environment]) if env # if the app defaults have been initialized then it should be safe to access the module path setting. $env_module_directories[env] ||= env.modulepath.collect do |dir| Dir.entries(dir).reject { |f| f =~ /^\./ }.collect { |f| File.join(dir, f, "lib") } end.flatten.find_all do |d| FileTest.directory?(d) end else [] end else # if we get here, the app defaults have not been initialized, so we basically use an empty module path. [] end end def libdirs() # See the comments in #module_directories above. Basically, we need to be careful not to try to access the # libdir before we know for sure that all of the settings have been initialized (e.g., during bootstrapping). if (Puppet.settings.app_defaults_initialized?) - Puppet[:libdir].split(File::PATH_SEPARATOR) + [Puppet[:libdir]] else [] end end def gem_directories gem_source.directories end def search_directories(env) [gem_directories, module_directories(env), libdirs(), $LOAD_PATH].flatten end # Normalize a path. This converts ALT_SEPARATOR to SEPARATOR on Windows # and eliminates unnecessary parts of a path. def cleanpath(path) # There are two cases here because cleanpath does not handle absolute # paths correctly on windows (c:\ and c:/ are treated as distinct) but # we don't want to convert relative paths to absolute if Puppet::Util.absolute_path?(path) File.expand_path(path) else Pathname.new(path).cleanpath.to_s end end end attr_accessor :object, :path def initialize(obj, path, options = {}) @path = path.to_s raise ArgumentError, "Autoload paths cannot be fully qualified" if Puppet::Util.absolute_path?(@path) @object = obj set_options(options) end def load(name, env = nil) self.class.load_file(expand(name), env) end # Load all instances from a path of Autoload.search_directories matching the # relative path this Autoloader was initialized with. For example, if we # have created a Puppet::Util::Autoload for Puppet::Type::User with a path of # 'puppet/provider/user', the search_directories path will be searched for # all ruby files matching puppet/provider/user/*.rb and they will then be # loaded from the first directory in the search path providing them. So # earlier entries in the search path may shadow later entries. # # This uses require, rather than load, so that already-loaded files don't get # reloaded unnecessarily. def loadall(env = nil) self.class.loadall(@path, env) end def loaded?(name) self.class.loaded?(expand(name)) end def changed?(name) self.class.changed?(expand(name)) end def files_to_load self.class.files_to_load(@path) end def expand(name) ::File.join(@path, name.to_s) end end diff --git a/spec/unit/util/autoload_spec.rb b/spec/unit/util/autoload_spec.rb index d24006360..ba9c137a8 100755 --- a/spec/unit/util/autoload_spec.rb +++ b/spec/unit/util/autoload_spec.rb @@ -1,275 +1,281 @@ #! /usr/bin/env ruby require 'spec_helper' require 'puppet/util/autoload' describe Puppet::Util::Autoload do include PuppetSpec::Files before do @autoload = Puppet::Util::Autoload.new("foo", "tmp") @loaded = {} @autoload.class.stubs(:loaded).returns(@loaded) end describe "when building the search path" do before :each do ## modulepath/libdir can't be used until after app settings are initialized, so we need to simulate that: Puppet.settings.expects(:app_defaults_initialized?).returns(true).at_least_once end it "should collect all of the lib directories that exist in the current environment's module path" do dira = dir_containing('dir_a', { "one" => {}, "two" => { "lib" => {} } }) dirb = dir_containing('dir_a', { "one" => {}, "two" => { "lib" => {} } }) environment = Puppet::Node::Environment.create(:foo, [dira, dirb]) @autoload.class.module_directories(environment).should == ["#{dira}/two/lib", "#{dirb}/two/lib"] end it "ignores missing module directories" do environment = Puppet::Node::Environment.create(:foo, [File.expand_path('does/not/exist')]) @autoload.class.module_directories(environment).should be_empty end it "ignores the configured environment when it doesn't exist" do Puppet[:environment] = 'nonexistent' Puppet.override({ :environments => Puppet::Environments::Static.new() }) do @autoload.class.module_directories(nil).should be_empty end end it "uses the configured environment when no environment is given" do Puppet[:environment] = 'nonexistent' Puppet.override({ :environments => Puppet::Environments::Static.new() }) do @autoload.class.module_directories(nil).should be_empty end end it "should include the module directories, the Puppet libdir, and all of the Ruby load directories" do - Puppet[:libdir] = %w{/libdir1 /lib/dir/two /third/lib/dir}.join(File::PATH_SEPARATOR) + Puppet[:libdir] = '/libdir1' @autoload.class.expects(:gem_directories).returns %w{/one /two} @autoload.class.expects(:module_directories).returns %w{/three /four} - @autoload.class.search_directories(nil).should == %w{/one /two /three /four} + Puppet[:libdir].split(File::PATH_SEPARATOR) + $LOAD_PATH + @autoload.class.search_directories(nil).should == %w{/one /two /three /four} + [Puppet[:libdir]] + $LOAD_PATH + end + + it "does not split the Puppet[:libdir]" do + Puppet[:libdir] = "/libdir1#{File::PATH_SEPARATOR}/libdir2" + + @autoload.class.libdirs.should == [Puppet[:libdir]] end end describe "when loading a file" do before do @autoload.class.stubs(:search_directories).returns [make_absolute("/a")] FileTest.stubs(:directory?).returns true @time_a = Time.utc(2010, 'jan', 1, 6, 30) File.stubs(:mtime).returns @time_a end [RuntimeError, LoadError, SyntaxError].each do |error| it "should die with Puppet::Error if a #{error.to_s} exception is thrown" do Puppet::FileSystem.stubs(:exist?).returns true Kernel.expects(:load).raises error lambda { @autoload.load("foo") }.should raise_error(Puppet::Error) end end it "should not raise an error if the file is missing" do @autoload.load("foo").should == false end it "should register loaded files with the autoloader" do Puppet::FileSystem.stubs(:exist?).returns true Kernel.stubs(:load) @autoload.load("myfile") @autoload.class.loaded?("tmp/myfile.rb").should be $LOADED_FEATURES.delete("tmp/myfile.rb") end it "should be seen by loaded? on the instance using the short name" do Puppet::FileSystem.stubs(:exist?).returns true Kernel.stubs(:load) @autoload.load("myfile") @autoload.loaded?("myfile.rb").should be $LOADED_FEATURES.delete("tmp/myfile.rb") end it "should register loaded files with the main loaded file list so they are not reloaded by ruby" do Puppet::FileSystem.stubs(:exist?).returns true Kernel.stubs(:load) @autoload.load("myfile") $LOADED_FEATURES.should be_include("tmp/myfile.rb") $LOADED_FEATURES.delete("tmp/myfile.rb") end it "should load the first file in the searchpath" do @autoload.stubs(:search_directories).returns [make_absolute("/a"), make_absolute("/b")] FileTest.stubs(:directory?).returns true Puppet::FileSystem.stubs(:exist?).returns true Kernel.expects(:load).with(make_absolute("/a/tmp/myfile.rb"), optionally(anything)) @autoload.load("myfile") $LOADED_FEATURES.delete("tmp/myfile.rb") end it "should treat equivalent paths to a loaded file as loaded" do Puppet::FileSystem.stubs(:exist?).returns true Kernel.stubs(:load) @autoload.load("myfile") @autoload.class.loaded?("tmp/myfile").should be @autoload.class.loaded?("tmp/./myfile.rb").should be @autoload.class.loaded?("./tmp/myfile.rb").should be @autoload.class.loaded?("tmp/../tmp/myfile.rb").should be $LOADED_FEATURES.delete("tmp/myfile.rb") end end describe "when loading all files" do before do @autoload.class.stubs(:search_directories).returns [make_absolute("/a")] FileTest.stubs(:directory?).returns true Dir.stubs(:glob).returns [make_absolute("/a/foo/file.rb")] Puppet::FileSystem.stubs(:exist?).returns true @time_a = Time.utc(2010, 'jan', 1, 6, 30) File.stubs(:mtime).returns @time_a @autoload.class.stubs(:loaded?).returns(false) end [RuntimeError, LoadError, SyntaxError].each do |error| it "should die an if a #{error.to_s} exception is thrown" do Kernel.expects(:load).raises error lambda { @autoload.loadall }.should raise_error(Puppet::Error) end end it "should require the full path to the file" do Kernel.expects(:load).with(make_absolute("/a/foo/file.rb"), optionally(anything)) @autoload.loadall end end describe "when reloading files" do before :each do @file_a = make_absolute("/a/file.rb") @file_b = make_absolute("/b/file.rb") @first_time = Time.utc(2010, 'jan', 1, 6, 30) @second_time = @first_time + 60 end after :each do $LOADED_FEATURES.delete("a/file.rb") $LOADED_FEATURES.delete("b/file.rb") end it "#changed? should return true for a file that was not loaded" do @autoload.class.changed?(@file_a).should be end it "changes should be seen by changed? on the instance using the short name" do File.stubs(:mtime).returns(@first_time) Puppet::FileSystem.stubs(:exist?).returns true Kernel.stubs(:load) @autoload.load("myfile") @autoload.loaded?("myfile").should be @autoload.changed?("myfile").should_not be File.stubs(:mtime).returns(@second_time) @autoload.changed?("myfile").should be $LOADED_FEATURES.delete("tmp/myfile.rb") end describe "in one directory" do before :each do @autoload.class.stubs(:search_directories).returns [make_absolute("/a")] File.expects(:mtime).with(@file_a).returns(@first_time) @autoload.class.mark_loaded("file", @file_a) end it "should reload if mtime changes" do File.stubs(:mtime).with(@file_a).returns(@first_time + 60) Puppet::FileSystem.stubs(:exist?).with(@file_a).returns true Kernel.expects(:load).with(@file_a, optionally(anything)) @autoload.class.reload_changed end it "should do nothing if the file is deleted" do File.stubs(:mtime).with(@file_a).raises(Errno::ENOENT) Puppet::FileSystem.stubs(:exist?).with(@file_a).returns false Kernel.expects(:load).never @autoload.class.reload_changed end end describe "in two directories" do before :each do @autoload.class.stubs(:search_directories).returns [make_absolute("/a"), make_absolute("/b")] end it "should load b/file when a/file is deleted" do File.expects(:mtime).with(@file_a).returns(@first_time) @autoload.class.mark_loaded("file", @file_a) File.stubs(:mtime).with(@file_a).raises(Errno::ENOENT) Puppet::FileSystem.stubs(:exist?).with(@file_a).returns false Puppet::FileSystem.stubs(:exist?).with(@file_b).returns true File.stubs(:mtime).with(@file_b).returns @first_time Kernel.expects(:load).with(@file_b, optionally(anything)) @autoload.class.reload_changed @autoload.class.send(:loaded)["file"].should == [@file_b, @first_time] end it "should load a/file when b/file is loaded and a/file is created" do File.stubs(:mtime).with(@file_b).returns @first_time Puppet::FileSystem.stubs(:exist?).with(@file_b).returns true @autoload.class.mark_loaded("file", @file_b) File.stubs(:mtime).with(@file_a).returns @first_time Puppet::FileSystem.stubs(:exist?).with(@file_a).returns true Kernel.expects(:load).with(@file_a, optionally(anything)) @autoload.class.reload_changed @autoload.class.send(:loaded)["file"].should == [@file_a, @first_time] end end end describe "#cleanpath" do it "should leave relative paths relative" do path = "hello/there" Puppet::Util::Autoload.cleanpath(path).should == path end describe "on Windows", :if => Puppet.features.microsoft_windows? do it "should convert c:\ to c:/" do Puppet::Util::Autoload.cleanpath('c:\\').should == 'c:/' end end end describe "#expand" do it "should expand relative to the autoloader's prefix" do @autoload.expand('bar').should == 'tmp/bar' end end end