diff --git a/man/man5/puppet.conf.5 b/man/man5/puppet.conf.5
index 43927fbcf..f653f8c4d 100644
--- a/man/man5/puppet.conf.5
+++ b/man/man5/puppet.conf.5
@@ -1,2052 +1,2028 @@
 .\" generated with Ronn/v0.7.3
 .\" http://github.com/rtomayko/ronn/tree/0.7.3
 .
 .TH "PUPPETCONF" "5" "September 2014" "Puppet Labs, LLC" "Puppet manual"
-\fBThis page is autogenerated; any changes will get overwritten\fR \fI(last generated on 2014\-09\-15 12:02:46 \-0700)\fR
+\fBThis page is autogenerated; any changes will get overwritten\fR \fI(last generated on 2014\-09\-16 20:41:04 \-0700)\fR
 .
 .SH "Configuration Settings"
 .
 .IP "\(bu" 4
 Each of these settings can be specified in \fBpuppet\.conf\fR or on the command line\.
 .
 .IP "\(bu" 4
 When using boolean settings on the command line, use \fB\-\-setting\fR and \fB\-\-no\-setting\fR instead of \fB\-\-setting (true|false)\fR\.
 .
 .IP "\(bu" 4
 Settings can be interpolated as \fB$variables\fR in other settings; \fB$environment\fR is special, in that puppet master will interpolate each agent node\'s environment instead of its own\.
 .
 .IP "\(bu" 4
 Multiple values should be specified as comma\-separated lists; multiple directories should be separated with the system path separator (usually a colon)\.
 .
 .IP "\(bu" 4
 Settings that represent time intervals should be specified in duration format: an integer immediately followed by one of the units \'y\' (years of 365 days), \'d\' (days), \'h\' (hours), \'m\' (minutes), or \'s\' (seconds)\. The unit cannot be combined with other units, and defaults to seconds when omitted\. Examples are \'3600\' which is equivalent to \'1h\' (one hour), and \'1825d\' which is equivalent to \'5y\' (5 years)\.
 .
 .IP "\(bu" 4
 Settings that take a single file or directory can optionally set the owner, group, and mode for their value: \fBrundir = $vardir/run { owner = puppet, group = puppet, mode = 644 }\fR
 .
 .IP "\(bu" 4
 The Puppet executables will ignore any setting that isn\'t relevant to their function\.
 .
 .IP "" 0
 .
 .P
 See the configuration guide \fIhttp://docs\.puppetlabs\.com/guides/configuring\.html\fR for more details\.
 .
 .SS "agent_catalog_run_lockfile"
 A lock file to indicate that a puppet agent catalog run is currently in progress\. The file contains the pid of the process that holds the lock on the catalog run\.
 .
 .IP "\(bu" 4
 \fIDefault\fR: $statedir/agent_catalog_run\.lock
 .
 .IP "" 0
 .
 .SS "agent_disabled_lockfile"
 A lock file to indicate that puppet agent runs have been administratively disabled\. File contains a JSON object with state information\.
 .
 .IP "\(bu" 4
 \fIDefault\fR: $statedir/agent_disabled\.lock
 .
 .IP "" 0
 .
 .SS "allow_duplicate_certs"
 Whether to allow a new certificate request to overwrite an existing certificate\.
 .
 .IP "\(bu" 4
 \fIDefault\fR: false
 .
 .IP "" 0
 .
 .SS "allow_variables_with_dashes"
 Permit hyphens (\fB\-\fR) in variable names and issue deprecation warnings about them\. This setting \fBshould always be \fBfalse\fR;\fR setting it to \fBtrue\fR will cause subtle and wide\-ranging bugs\. It will be removed in a future version\.
 .
 .P
 Hyphenated variables caused major problems in the language, but were allowed between Puppet 2\.7\.3 and 2\.7\.14\. If you used them during this window, we apologize for the inconvenience \-\-\- you can temporarily set this to \fBtrue\fR in order to upgrade, and can rename your variables at your leisure\. Please revert it to \fBfalse\fR after you have renamed all affected variables\.
 .
 .IP "\(bu" 4
 \fIDefault\fR: false
 .
 .IP "" 0
 .
 .SS "always_cache_features"
 Affects how we cache attempts to load Puppet \'features\'\. If false, then calls to \fBPuppet\.features\.<feature>?\fR will always attempt to load the feature (which can be an expensive operation) unless it has already been loaded successfully\. This makes it possible for a single agent run to, e\.g\., install a package that provides the underlying capabilities for a feature, and then later load that feature during the same run (even if the feature had been tested earlier and had not been available)\.
 .
 .P
 If this setting is set to true, then features will only be checked once, and if they are not available, the negative result is cached and returned for all subsequent attempts to load the feature\. This behavior is almost always appropriate for the server, and can result in a significant performance improvement for features that are checked frequently\.
 .
 .IP "\(bu" 4
 \fIDefault\fR: false
 .
 .IP "" 0
 .
 .SS "archive_file_server"
 During an inspect run, the file bucket server to archive files to if archive_files is set\.
 .
 .IP "\(bu" 4
 \fIDefault\fR: $server
 .
 .IP "" 0
 .
 .SS "archive_files"
 During an inspect run, whether to archive files whose contents are audited to a file bucket\.
 .
 .IP "\(bu" 4
 \fIDefault\fR: false
 .
 .IP "" 0
 .
-.SS "async_storeconfigs"
-Whether to use a queueing system to provide asynchronous database integration\. Requires that \fBpuppet queue\fR be running\.
-.
-.IP "\(bu" 4
-\fIDefault\fR: false
-.
-.IP "" 0
-.
 .SS "autoflush"
 Whether log files should always flush to disk\.
 .
 .IP "\(bu" 4
 \fIDefault\fR: true
 .
 .IP "" 0
 .
 .SS "autosign"
 Whether (and how) to autosign certificate requests\. This setting is only relevant on a puppet master acting as a certificate authority (CA)\.
 .
 .P
 Valid values are true (autosigns all certificate requests; not recommended), false (disables autosigning certificates), or the absolute path to a file\.
 .
 .P
 The file specified in this setting may be either a \fBconfiguration file\fR or a \fBcustom policy executable\.\fR Puppet will automatically determine what it is: If the Puppet user (see the \fBuser\fR setting) can execute the file, it will be treated as a policy executable; otherwise, it will be treated as a config file\.
 .
 .P
 If a custom policy executable is configured, the CA puppet master will run it every time it receives a CSR\. The executable will be passed the subject CN of the request \fIas a command line argument,\fR and the contents of the CSR in PEM format \fIon stdin\.\fR It should exit with a status of 0 if the cert should be autosigned and non\-zero if the cert should not be autosigned\.
 .
 .P
 If a certificate request is not autosigned, it will persist for review\. An admin user can use the \fBpuppet cert sign\fR command to manually sign it, or can delete the request\.
 .
 .P
 For info on autosign configuration files, see the guide to Puppet\'s config files \fIhttp://docs\.puppetlabs\.com/guides/configuring\.html\fR\.
 .
 .IP "\(bu" 4
 \fIDefault\fR: $confdir/autosign\.conf
 .
 .IP "" 0
 .
 .SS "basemodulepath"
 The search path for \fBglobal\fR modules\. Should be specified as a list of directories separated by the system path separator character\. (The POSIX path separator is \':\', and the Windows path separator is \';\'\.)
 .
 .P
 If you are using directory environments, these are the modules that will be used by \fIall\fR environments\. Note that the \fBmodules\fR directory of the active environment will have priority over any global directories\. For more info, see http://docs\.puppetlabs\.com/puppet/latest/reference/environments\.html
 .
 .P
 This setting also provides the default value for the deprecated \fBmodulepath\fR setting, which is used when directory environments are disabled\.
 .
 .IP "\(bu" 4
 \fIDefault\fR: $confdir/modules:/usr/share/puppet/modules
 .
 .IP "" 0
 .
 .SS "bindaddress"
 The address a listening server should bind to\.
 .
 .IP "\(bu" 4
 \fIDefault\fR: 0\.0\.0\.0
 .
 .IP "" 0
 .
 .SS "binder"
 Turns the binding system on or off\. This includes bindings in modules\. The binding system aggregates data from modules and other locations and makes them available for lookup\. The binding system is experimental and any or all of it may change\.
 .
 .IP "\(bu" 4
 \fIDefault\fR: false
 .
 .IP "" 0
 .
 .SS "binder_config"
 The binder configuration file\. Puppet reads this file on each request to configure the bindings system\. If set to nil (the default), a $confdir/binder_config\.yaml is optionally loaded\. If it does not exists, a default configuration is used\. If the setting :binding_config is specified, it must reference a valid and existing yaml file\.
 .
 .TP
 \fIDefault\fR:
 
 .
 .SS "bucketdir"
 Where FileBucket files are stored\.
 .
 .IP "\(bu" 4
 \fIDefault\fR: $vardir/bucket
 .
 .IP "" 0
 .
 .SS "ca"
 Whether the master should function as a certificate authority\.
 .
 .IP "\(bu" 4
 \fIDefault\fR: true
 .
 .IP "" 0
 .
 .SS "ca_name"
 The name to use the Certificate Authority certificate\.
 .
 .IP "\(bu" 4
 \fIDefault\fR: Puppet CA: $certname
 .
 .IP "" 0
 .
 .SS "ca_port"
 The port to use for the certificate authority\.
 .
 .IP "\(bu" 4
 \fIDefault\fR: $masterport
 .
 .IP "" 0
 .
 .SS "ca_server"
 The server to use for certificate authority requests\. It\'s a separate server because it cannot and does not need to horizontally scale\.
 .
 .IP "\(bu" 4
 \fIDefault\fR: $server
 .
 .IP "" 0
 .
 .SS "ca_ttl"
 The default TTL for new certificates\. This setting can be a time interval in seconds (30 or 30s), minutes (30m), hours (6h), days (2d), or years (5y)\.
 .
 .IP "\(bu" 4
 \fIDefault\fR: 5y
 .
 .IP "" 0
 .
 .SS "cacert"
 The CA certificate\.
 .
 .IP "\(bu" 4
 \fIDefault\fR: $cadir/ca_crt\.pem
 .
 .IP "" 0
 .
 .SS "cacrl"
 The certificate revocation list (CRL) for the CA\. Will be used if present but otherwise ignored\.
 .
 .IP "\(bu" 4
 \fIDefault\fR: $cadir/ca_crl\.pem
 .
 .IP "" 0
 .
 .SS "cadir"
 The root directory for the certificate authority\.
 .
 .IP "\(bu" 4
 \fIDefault\fR: $ssldir/ca
 .
 .IP "" 0
 .
 .SS "cakey"
 The CA private key\.
 .
 .IP "\(bu" 4
 \fIDefault\fR: $cadir/ca_key\.pem
 .
 .IP "" 0
 .
 .SS "capass"
 Where the CA stores the password for the private key\.
 .
 .IP "\(bu" 4
 \fIDefault\fR: $caprivatedir/ca\.pass
 .
 .IP "" 0
 .
 .SS "caprivatedir"
 Where the CA stores private certificate information\.
 .
 .IP "\(bu" 4
 \fIDefault\fR: $cadir/private
 .
 .IP "" 0
 .
 .SS "capub"
 The CA public key\.
 .
 .IP "\(bu" 4
 \fIDefault\fR: $cadir/ca_pub\.pem
 .
 .IP "" 0
 .
 .SS "catalog_cache_terminus"
 How to store cached catalogs\. Valid values are \'json\', \'msgpack\' and \'yaml\'\. The agent application defaults to \'json\'\.
 .
 .TP
 \fIDefault\fR:
 
 .
 .SS "catalog_format"
 (Deprecated for \'preferred_serialization_format\') What format to use to dump the catalog\. Only supports \'marshal\' and \'yaml\'\. Only matters on the client, since it asks the server for a specific format\.
 .
 .SS "catalog_terminus"
 Where to get node catalogs\. This is useful to change if, for instance, you\'d like to pre\-compile catalogs and store them in memcached or some other easily\-accessed store\.
 .
 .IP "\(bu" 4
 \fIDefault\fR: compiler
 .
 .IP "" 0
 .
 .SS "cert_inventory"
 The inventory file\. This is a text file to which the CA writes a complete listing of all certificates\.
 .
 .IP "\(bu" 4
 \fIDefault\fR: $cadir/inventory\.txt
 .
 .IP "" 0
 .
 .SS "certdir"
 The certificate directory\.
 .
 .IP "\(bu" 4
 \fIDefault\fR: $ssldir/certs
 .
 .IP "" 0
 .
 .SS "certdnsnames"
 The \fBcertdnsnames\fR setting is no longer functional, after CVE\-2011\-3872\. We ignore the value completely\.
 .
 .P
 For your own certificate request you can set \fBdns_alt_names\fR in the configuration and it will apply locally\. There is no configuration option to set DNS alt names, or any other \fBsubjectAltName\fR value, for another nodes certificate\.
 .
 .P
 Alternately you can use the \fB\-\-dns_alt_names\fR command line option to set the labels added while generating your own CSR\.
 .
 .SS "certificate_expire_warning"
 The window of time leading up to a certificate\'s expiration that a notification will be logged\. This applies to CA, master, and agent certificates\. This setting can be a time interval in seconds (30 or 30s), minutes (30m), hours (6h), days (2d), or years (5y)\.
 .
 .IP "\(bu" 4
 \fIDefault\fR: 60d
 .
 .IP "" 0
 .
 .SS "certificate_revocation"
 Whether certificate revocation should be supported by downloading a Certificate Revocation List (CRL) to all clients\. If enabled, CA chaining will almost definitely not work\.
 .
 .IP "\(bu" 4
 \fIDefault\fR: true
 .
 .IP "" 0
 .
 .SS "certname"
 The name to use when handling certificates\. When a node requests a certificate from the CA puppet master, it uses the value of the \fBcertname\fR setting as its requested Subject CN\.
 .
 .P
 This is the name used when managing a node\'s permissions in auth\.conf \fIhttp://docs\.puppetlabs\.com/puppet/latest/reference/config_file_auth\.html\fR\. In most cases, it is also used as the node\'s name when matching node definitions \fIhttp://docs\.puppetlabs\.com/puppet/latest/reference/lang_node_definitions\.html\fR and requesting data from an ENC\. (This can be changed with the \fBnode_name_value\fR and \fBnode_name_fact\fR settings, although you should only do so if you have a compelling reason\.)
 .
 .P
 A node\'s certname is available in Puppet manifests as \fB$trusted[\'certname\']\fR\. (See Facts and Built\-In Variables \fIhttp://docs\.puppetlabs\.com/puppet/latest/reference/lang_facts_and_builtin_vars\.html\fR for more details\.)
 .
 .IP "\(bu" 4
 For best compatibility, you should limit the value of \fBcertname\fR to only use letters, numbers, periods, underscores, and dashes\. (That is, it should match \fB/A[a\-z0\-9\._\-]+Z/\fR\.)
 .
 .IP "\(bu" 4
 The special value \fBca\fR is reserved, and can\'t be used as the certname for a normal node\.
 .
 .IP "" 0
 .
 .P
 Defaults to the node\'s fully qualified domain name\.
 .
 .IP "\(bu" 4
 \fIDefault\fR: aparker\.corp\.puppetlabs\.net
 .
 .IP "" 0
 .
 .SS "cfacter"
 Whether or not to use the native facter (cfacter) implementation instead of the Ruby one (facter)\. Defaults to false\.
 .
 .IP "\(bu" 4
 \fIDefault\fR: false
 .
 .IP "" 0
 .
 .SS "classfile"
 The file in which puppet agent stores a list of the classes associated with the retrieved configuration\. Can be loaded in the separate \fBpuppet\fR executable using the \fB\-\-loadclasses\fR option\.
 .
 .IP "\(bu" 4
 \fIDefault\fR: $statedir/classes\.txt
 .
 .IP "" 0
 .
 .SS "client_datadir"
 The directory in which serialized data is stored on the client\.
 .
 .IP "\(bu" 4
 \fIDefault\fR: $vardir/client_data
 .
 .IP "" 0
 .
 .SS "clientbucketdir"
 Where FileBucket files are stored locally\.
 .
 .IP "\(bu" 4
 \fIDefault\fR: $vardir/clientbucket
 .
 .IP "" 0
 .
 .SS "clientyamldir"
 The directory in which client\-side YAML data is stored\.
 .
 .IP "\(bu" 4
 \fIDefault\fR: $vardir/client_yaml
 .
 .IP "" 0
 .
 .SS "code"
 Code to parse directly\. This is essentially only used by \fBpuppet\fR, and should only be set if you\'re writing your own Puppet executable\.
 .
 .SS "color"
 Whether to use colors when logging to the console\. Valid values are \fBansi\fR (equivalent to \fBtrue\fR), \fBhtml\fR, and \fBfalse\fR, which produces no color\. Defaults to false on Windows, as its console does not support ansi colors\.
 .
 .IP "\(bu" 4
 \fIDefault\fR: ansi
 .
 .IP "" 0
 .
 .SS "confdir"
 The main Puppet configuration directory\. The default for this setting is calculated based on the user\. If the process is running as root or the user that Puppet is supposed to run as, it defaults to a system directory, but if it\'s running as any other user, it defaults to being in the user\'s home directory\.
 .
 .IP "\(bu" 4
 \fIDefault\fR: /etc/puppet
 .
 .IP "" 0
 .
 .SS "config"
 The configuration file for the current puppet application\.
 .
 .IP "\(bu" 4
 \fIDefault\fR: $confdir/${config_file_name}
 .
 .IP "" 0
 .
 .SS "config_file_name"
 The name of the puppet config file\.
 .
 .IP "\(bu" 4
 \fIDefault\fR: puppet\.conf
 .
 .IP "" 0
 .
 .SS "config_version"
 How to determine the configuration version\. By default, it will be the time that the configuration is parsed, but you can provide a shell script to override how the version is determined\. The output of this script will be added to every log message in the reports, allowing you to correlate changes on your hosts to the source version on the server\.
 .
 .P
 Setting a global value for config_version in puppet\.conf is deprecated\. Please set a per\-environment value in environment\.conf instead\. For more info, see http://docs\.puppetlabs\.com/puppet/latest/reference/environments\.html
 .
 .SS "configprint"
 Print the value of a specific configuration setting\. If the name of a setting is provided for this, then the value is printed and puppet exits\. Comma\-separate multiple values\. For a list of all values, specify \'all\'\.
 .
 .SS "configtimeout"
 How long the client should wait for the configuration to be retrieved before considering it a failure\. This can help reduce flapping if too many clients contact the server at one time\. This setting can be a time interval in seconds (30 or 30s), minutes (30m), hours (6h), days (2d), or years (5y)\.
 .
 .IP "\(bu" 4
 \fIDefault\fR: 2m
 .
 .IP "" 0
 .
 .SS "csr_attributes"
 An optional file containing custom attributes to add to certificate signing requests (CSRs)\. You should ensure that this file does not exist on your CA puppet master; if it does, unwanted certificate extensions may leak into certificates created with the \fBpuppet cert generate\fR command\.
 .
 .P
 If present, this file must be a YAML hash containing a \fBcustom_attributes\fR key and/or an \fBextension_requests\fR key\. The value of each key must be a hash, where each key is a valid OID and each value is an object that can be cast to a string\.
 .
 .P
 Custom attributes can be used by the CA when deciding whether to sign the certificate, but are then discarded\. Attribute OIDs can be any OID value except the standard CSR attributes (i\.e\. attributes described in RFC 2985 section 5\.4)\. This is useful for embedding a pre\-shared key for autosigning policy executables (see the \fBautosign\fR setting), often by using the \fB1\.2\.840\.113549\.1\.9\.7\fR ("challenge password") OID\.
 .
 .P
 Extension requests will be permanently embedded in the final certificate\. Extension OIDs must be in the "ppRegCertExt" (\fB1\.3\.6\.1\.4\.1\.34380\.1\.1\fR) or "ppPrivCertExt" (\fB1\.3\.6\.1\.4\.1\.34380\.1\.2\fR) OID arcs\. The ppRegCertExt arc is reserved for four of the most common pieces of data to embed: \fBpp_uuid\fR (\fB\.1\fR), \fBpp_instance_id\fR (\fB\.2\fR), \fBpp_image_name\fR (\fB\.3\fR), and \fBpp_preshared_key\fR (\fB\.4\fR) \-\-\- in the YAML file, these can be referred to by their short descriptive names instead of their full OID\. The ppPrivCertExt arc is unregulated, and can be used for site\-specific extensions\.
 .
 .IP "\(bu" 4
 \fIDefault\fR: $confdir/csr_attributes\.yaml
 .
 .IP "" 0
 .
 .SS "csrdir"
 Where the CA stores certificate requests
 .
 .IP "\(bu" 4
 \fIDefault\fR: $cadir/requests
 .
 .IP "" 0
 .
 .SS "daemonize"
 Whether to send the process into the background\. This defaults to true on POSIX systems, and to false on Windows (where Puppet currently cannot daemonize)\.
 .
 .IP "\(bu" 4
 \fIDefault\fR: true
 .
 .IP "" 0
 .
 .SS "data_binding_terminus"
 Where to retrive information about data\.
 .
 .IP "\(bu" 4
 \fIDefault\fR: hiera
 .
 .IP "" 0
 .
 .SS "dbadapter"
 The type of database to use\. This setting is only used by the ActiveRecord storeconfigs and inventory backends, which are deprecated\.
 .
 .IP "\(bu" 4
 \fIDefault\fR: sqlite3
 .
 .IP "" 0
 .
 .SS "dbconnections"
 The number of database connections for networked databases\. Will be ignored unless the value is a positive integer\. This setting is only used by the ActiveRecord storeconfigs and inventory backends, which are deprecated\.
 .
 .SS "dblocation"
 The sqlite database file\. This setting is only used by the ActiveRecord storeconfigs and inventory backends, which are deprecated\.
 .
 .IP "\(bu" 4
 \fIDefault\fR: $statedir/clientconfigs\.sqlite3
 .
 .IP "" 0
 .
 .SS "dbmigrate"
 Whether to automatically migrate the database\. This setting is only used by the ActiveRecord storeconfigs and inventory backends, which are deprecated\.
 .
 .IP "\(bu" 4
 \fIDefault\fR: false
 .
 .IP "" 0
 .
 .SS "dbname"
 The name of the database to use\. This setting is only used by the ActiveRecord storeconfigs and inventory backends, which are deprecated\.
 .
 .IP "\(bu" 4
 \fIDefault\fR: puppet
 .
 .IP "" 0
 .
 .SS "dbpassword"
 The database password for caching\. Only used when networked databases are used\. This setting is only used by the ActiveRecord storeconfigs and inventory backends, which are deprecated\.
 .
 .IP "\(bu" 4
 \fIDefault\fR: puppet
 .
 .IP "" 0
 .
 .SS "dbport"
 The database password for caching\. Only used when networked databases are used\. This setting is only used by the ActiveRecord storeconfigs and inventory backends, which are deprecated\.
 .
 .SS "dbserver"
 The database server for caching\. Only used when networked databases are used\.
 .
 .IP "\(bu" 4
 \fIDefault\fR: localhost
 .
 .IP "" 0
 .
 .SS "dbsocket"
 The database socket location\. Only used when networked databases are used\. Will be ignored if the value is an empty string\. This setting is only used by the ActiveRecord storeconfigs and inventory backends, which are deprecated\.
 .
 .SS "dbuser"
 The database user for caching\. Only used when networked databases are used\. This setting is only used by the ActiveRecord storeconfigs and inventory backends, which are deprecated\.
 .
 .IP "\(bu" 4
 \fIDefault\fR: puppet
 .
 .IP "" 0
 .
 .SS "default_file_terminus"
 The default source for files if no server is given in a uri, e\.g\. puppet:///file\. The default of \fBrest\fR causes the file to be retrieved using the \fBserver\fR setting\. When running \fBapply\fR the default is \fBfile_server\fR, causing requests to be filled locally\.
 .
 .IP "\(bu" 4
 \fIDefault\fR: rest
 .
 .IP "" 0
 .
 .SS "default_manifest"
 The default main manifest for directory environments\. Any environment that doesn\'t set the \fBmanifest\fR setting in its \fBenvironment\.conf\fR file will use this manifest\.
 .
 .P
 This setting\'s value can be an absolute or relative path\. An absolute path will make all environments default to the same main manifest; a relative path will allow each environment to use its own manifest, and Puppet will resolve the path relative to each environment\'s main directory\.
 .
 .P
 In either case, the path can point to a single file or to a directory of manifests to be evaluated in alphabetical order\.
 .
 .IP "\(bu" 4
 \fIDefault\fR: \./manifests
 .
 .IP "" 0
 .
 .SS "default_schedules"
 Boolean; whether to generate the default schedule resources\. Setting this to false is useful for keeping external report processors clean of skipped schedule resources\.
 .
 .IP "\(bu" 4
 \fIDefault\fR: true
 .
 .IP "" 0
 .
 .SS "deviceconfig"
 Path to the device config file for puppet device\.
 .
 .IP "\(bu" 4
 \fIDefault\fR: $confdir/device\.conf
 .
 .IP "" 0
 .
 .SS "devicedir"
 The root directory of devices\' $vardir\.
 .
 .IP "\(bu" 4
 \fIDefault\fR: $vardir/devices
 .
 .IP "" 0
 .
 .SS "diff"
 Which diff command to use when printing differences between files\. This setting has no default value on Windows, as standard \fBdiff\fR is not available, but Puppet can use many third\-party diff tools\.
 .
 .IP "\(bu" 4
 \fIDefault\fR: diff
 .
 .IP "" 0
 .
 .SS "diff_args"
 Which arguments to pass to the diff command when printing differences between files\. The command to use can be chosen with the \fBdiff\fR setting\.
 .
 .IP "\(bu" 4
 \fIDefault\fR: \-u
 .
 .IP "" 0
 .
 .SS "digest_algorithm"
 Which digest algorithm to use for file resources and the filebucket\. Valid values are md5, sha256\. Default is md5\.
 .
 .IP "\(bu" 4
 \fIDefault\fR: md5
 .
 .IP "" 0
 .
 .SS "disable_per_environment_manifest"
 Whether to disallow an environment\-specific main manifest\. When set to \fBtrue\fR, Puppet will use the manifest specified in the \fBdefault_manifest\fR setting for all environments\. If an environment specifies a different main manifest in its \fBenvironment\.conf\fR file, catalog requests for that environment will fail with an error\.
 .
 .P
 This setting requires \fBdefault_manifest\fR to be set to an absolute path\.
 .
 .IP "\(bu" 4
 \fIDefault\fR: false
 .
 .IP "" 0
 .
 .SS "disable_warnings"
 A comma\-separated list of warning types to suppress\. If large numbers of warnings are making Puppet\'s logs too large or difficult to use, you can temporarily silence them with this setting\.
 .
 .P
 If you are preparing to upgrade Puppet to a new major version, you should re\-enable all warnings for a while\.
 .
 .P
 Valid values for this setting are:
 .
 .IP "\(bu" 4
 \fBdeprecations\fR \-\-\- disables deprecation warnings\.
 .
 .IP "\(bu" 4
 \fIDefault\fR: []
 .
 .IP "" 0
 .
 .SS "dns_alt_names"
 The comma\-separated list of alternative DNS names to use for the local host\.
 .
 .P
 When the node generates a CSR for itself, these are added to the request as the desired \fBsubjectAltName\fR in the certificate: additional DNS labels that the certificate is also valid answering as\.
 .
 .P
 This is generally required if you use a non\-hostname \fBcertname\fR, or if you want to use \fBpuppet kick\fR or \fBpuppet resource \-H\fR and the primary certname does not match the DNS name you use to communicate with the host\.
 .
 .P
 This is unnecessary for agents, unless you intend to use them as a server for \fBpuppet kick\fR or remote \fBpuppet resource\fR management\.
 .
 .P
 It is rarely necessary for servers; it is usually helpful only if you need to have a pool of multiple load balanced masters, or for the same master to respond on two physically separate networks under different names\.
 .
 .SS "document_all"
 Whether to document all resources when using \fBpuppet doc\fR to generate manifest documentation\.
 .
 .IP "\(bu" 4
 \fIDefault\fR: false
 .
 .IP "" 0
 .
 .SS "dynamicfacts"
 (Deprecated) Facts that are dynamic; these facts will be ignored when deciding whether changed facts should result in a recompile\. Multiple facts should be comma\-separated\.
 .
 .IP "\(bu" 4
 \fIDefault\fR: memorysize,memoryfree,swapsize,swapfree
 .
 .IP "" 0
 .
 .SS "environment"
 The environment Puppet is running in\. For clients (e\.g\., \fBpuppet agent\fR) this determines the environment itself, which is used to find modules and much more\. For servers (i\.e\., \fBpuppet master\fR) this provides the default environment for nodes we know nothing about\.
 .
 .IP "\(bu" 4
 \fIDefault\fR: production
 .
 .IP "" 0
 .
 .SS "environment_timeout"
 The time to live for a cached environment\. This setting can be a time interval in seconds (30 or 30s), minutes (30m), hours (6h), days (2d), or years (5y)\. This setting can also be set to \fBunlimited\fR, which causes the environment to be cached until the master is restarted\.
 .
 .IP "\(bu" 4
 \fIDefault\fR: unlimited
 .
 .IP "" 0
 .
 .SS "environmentpath"
 A search path for directory environments, as a list of directories separated by the system path separator character\. (The POSIX path separator is \':\', and the Windows path separator is \';\'\.)
 .
 .P
 This setting must have a value set to enable \fBdirectory environments\.\fR The recommended value is \fB$confdir/environments\fR\. For more details, see http://docs\.puppetlabs\.com/puppet/latest/reference/environments\.html
 .
 .SS "evaltrace"
 Whether each resource should log when it is being evaluated\. This allows you to interactively see exactly what is being done\.
 .
 .IP "\(bu" 4
 \fIDefault\fR: false
 .
 .IP "" 0
 .
 .SS "external_nodes"
 An external command that can produce node information\. The command\'s output must be a YAML dump of a hash, and that hash must have a \fBclasses\fR key and/or a \fBparameters\fR key, where \fBclasses\fR is an array or hash and \fBparameters\fR is a hash\. For unknown nodes, the command should exit with a non\-zero exit code\.
 .
 .P
 This command makes it straightforward to store your node mapping information in other data sources like databases\.
 .
 .IP "\(bu" 4
 \fIDefault\fR: none
 .
 .IP "" 0
 .
 .SS "factpath"
 Where Puppet should look for facts\. Multiple directories should be separated by the system path separator character\. (The POSIX path separator is \':\', and the Windows path separator is \';\'\.)
 .
 .IP "\(bu" 4
 \fIDefault\fR: $vardir/lib/facter:$vardir/facts
 .
 .IP "" 0
 .
 .SS "facts_terminus"
 The node facts terminus\.
 .
 .IP "\(bu" 4
 \fIDefault\fR: facter
 .
 .IP "" 0
 .
 .SS "fileserverconfig"
 Where the fileserver configuration is stored\.
 .
 .IP "\(bu" 4
 \fIDefault\fR: $confdir/fileserver\.conf
 .
 .IP "" 0
 .
 .SS "filetimeout"
 The minimum time to wait between checking for updates in configuration files\. This timeout determines how quickly Puppet checks whether a file (such as manifests or templates) has changed on disk\. This setting can be a time interval in seconds (30 or 30s), minutes (30m), hours (6h), days (2d), or years (5y)\.
 .
 .IP "\(bu" 4
 \fIDefault\fR: 15s
 .
 .IP "" 0
 .
 .SS "forge_authorization"
 The authorization key to connect to the Puppet Forge\. Leave blank for unauthorized or license based connections
 .
 .TP
 \fIDefault\fR:
 
 .
 .SS "freeze_main"
 Freezes the \'main\' class, disallowing any code to be added to it\. This essentially means that you can\'t have any code outside of a node, class, or definition other than in the site manifest\.
 .
 .IP "\(bu" 4
 \fIDefault\fR: false
 .
 .IP "" 0
 .
 .SS "genconfig"
 When true, causes Puppet applications to print an example config file to stdout and exit\. The example will include descriptions of each setting, and the current (or default) value of each setting, incorporating any settings overridden on the CLI (with the exception of \fBgenconfig\fR itself)\. This setting only makes sense when specified on the command line as \fB\-\-genconfig\fR\.
 .
 .IP "\(bu" 4
 \fIDefault\fR: false
 .
 .IP "" 0
 .
 .SS "genmanifest"
 Whether to just print a manifest to stdout and exit\. Only makes sense when specified on the command line as \fB\-\-genmanifest\fR\. Takes into account arguments specified on the CLI\.
 .
 .IP "\(bu" 4
 \fIDefault\fR: false
 .
 .IP "" 0
 .
 .SS "graph"
 Whether to create dot graph files for the different configuration graphs\. These dot files can be interpreted by tools like OmniGraffle or dot (which is part of ImageMagick)\.
 .
 .IP "\(bu" 4
 \fIDefault\fR: false
 .
 .IP "" 0
 .
 .SS "graphdir"
 Where to store dot\-outputted graphs\.
 .
 .IP "\(bu" 4
 \fIDefault\fR: $statedir/graphs
 .
 .IP "" 0
 .
 .SS "group"
 The group puppet master should run as\.
 .
 .IP "\(bu" 4
 \fIDefault\fR: puppet
 .
 .IP "" 0
 .
 .SS "hiera_config"
 The hiera configuration file\. Puppet only reads this file on startup, so you must restart the puppet master every time you edit it\.
 .
 .IP "\(bu" 4
 \fIDefault\fR: $confdir/hiera\.yaml
 .
 .IP "" 0
 .
 .SS "hostcert"
 Where individual hosts store and look for their certificates\.
 .
 .IP "\(bu" 4
 \fIDefault\fR: $certdir/$certname\.pem
 .
 .IP "" 0
 .
 .SS "hostcrl"
 Where the host\'s certificate revocation list can be found\. This is distinct from the certificate authority\'s CRL\.
 .
 .IP "\(bu" 4
 \fIDefault\fR: $ssldir/crl\.pem
 .
 .IP "" 0
 .
 .SS "hostcsr"
 Where individual hosts store and look for their certificate requests\.
 .
 .IP "\(bu" 4
 \fIDefault\fR: $ssldir/csr_$certname\.pem
 .
 .IP "" 0
 .
 .SS "hostprivkey"
 Where individual hosts store and look for their private key\.
 .
 .IP "\(bu" 4
 \fIDefault\fR: $privatekeydir/$certname\.pem
 .
 .IP "" 0
 .
 .SS "hostpubkey"
 Where individual hosts store and look for their public key\.
 .
 .IP "\(bu" 4
 \fIDefault\fR: $publickeydir/$certname\.pem
 .
 .IP "" 0
 .
 .SS "http_compression"
 Allow http compression in REST communication with the master\. This setting might improve performance for agent \-> master communications over slow WANs\. Your puppet master needs to support compression (usually by activating some settings in a reverse\-proxy in front of the puppet master, which rules out webrick)\. It is harmless to activate this settings if your master doesn\'t support compression, but if it supports it, this setting might reduce performance on high\-speed LANs\.
 .
 .IP "\(bu" 4
 \fIDefault\fR: false
 .
 .IP "" 0
 .
 .SS "http_debug"
 Whether to write HTTP request and responses to stderr\. This should never be used in a production environment\.
 .
 .IP "\(bu" 4
 \fIDefault\fR: false
 .
 .IP "" 0
 .
 .SS "http_keepalive_timeout"
 The maximum amount of time a persistent HTTP connection can remain idle in the connection pool, before it is closed\. This timeout should be shorter than the keepalive timeout used on the HTTP server, e\.g\. Apache KeepAliveTimeout directive\. This setting can be a time interval in seconds (30 or 30s), minutes (30m), hours (6h), days (2d), or years (5y)\.
 .
 .IP "\(bu" 4
 \fIDefault\fR: 4s
 .
 .IP "" 0
 .
 .SS "http_proxy_host"
 The HTTP proxy host to use for outgoing connections\. Note: You may need to use a FQDN for the server hostname when using a proxy\. Environment variable http_proxy or HTTP_PROXY will override this value
 .
 .IP "\(bu" 4
 \fIDefault\fR: none
 .
 .IP "" 0
 .
 .SS "http_proxy_password"
 The password for the user of an authenticated HTTP proxy\. Requires the \fBhttp_proxy_user\fR setting\.
 .
 .P
 Note that passwords must be valid when used as part of a URL\. If a password contains any characters with special meanings in URLs (as specified by RFC 3986 section 2\.2), they must be URL\-encoded\. (For example, \fB#\fR would become \fB%23\fR\.)
 .
 .IP "\(bu" 4
 \fIDefault\fR: none
 .
 .IP "" 0
 .
 .SS "http_proxy_port"
 The HTTP proxy port to use for outgoing connections
 .
 .IP "\(bu" 4
 \fIDefault\fR: 3128
 .
 .IP "" 0
 .
 .SS "http_proxy_user"
 The user name for an authenticated HTTP proxy\. Requires the \fBhttp_proxy_host\fR setting\.
 .
 .IP "\(bu" 4
 \fIDefault\fR: none
 .
 .IP "" 0
 .
 .SS "httplog"
 Where the puppet agent web server logs\.
 .
 .IP "\(bu" 4
 \fIDefault\fR: $logdir/http\.log
 .
 .IP "" 0
 .
 .SS "ignorecache"
 Ignore cache and always recompile the configuration\. This is useful for testing new configurations, where the local cache may in fact be stale even if the timestamps are up to date \- if the facts change or if the server changes\.
 .
 .IP "\(bu" 4
 \fIDefault\fR: false
 .
 .IP "" 0
 .
 .SS "ignoreimport"
 If true, allows the parser to continue without requiring all files referenced with \fBimport\fR statements to exist\. This setting was primarily designed for use with commit hooks for parse\-checking\.
 .
 .IP "\(bu" 4
 \fIDefault\fR: false
 .
 .IP "" 0
 .
 .SS "ignoremissingtypes"
 Skip searching for classes and definitions that were missing during a prior compilation\. The list of missing objects is maintained per\-environment and persists until the environment is cleared or the master is restarted\.
 .
 .IP "\(bu" 4
 \fIDefault\fR: false
 .
 .IP "" 0
 .
 .SS "ignoreschedules"
 Boolean; whether puppet agent should ignore schedules\. This is useful for initial puppet agent runs\.
 .
 .IP "\(bu" 4
 \fIDefault\fR: false
 .
 .IP "" 0
 .
 .SS "immutable_node_data"
 When true, also prevents $trusted and $facts from being overridden in any scope
 .
 .IP "\(bu" 4
 \fIDefault\fR: $trusted_node_data
 .
 .IP "" 0
 .
 .SS "keylength"
 The bit length of keys\.
 .
 .IP "\(bu" 4
 \fIDefault\fR: 4096
 .
 .IP "" 0
 .
 .SS "lastrunfile"
 Where puppet agent stores the last run report summary in yaml format\.
 .
 .IP "\(bu" 4
 \fIDefault\fR: $statedir/last_run_summary\.yaml
 .
 .IP "" 0
 .
 .SS "lastrunreport"
 Where puppet agent stores the last run report in yaml format\.
 .
 .IP "\(bu" 4
 \fIDefault\fR: $statedir/last_run_report\.yaml
 .
 .IP "" 0
 .
 .SS "ldapattrs"
 The LDAP attributes to include when querying LDAP for nodes\. All returned attributes are set as variables in the top\-level scope\. Multiple values should be comma\-separated\. The value \'all\' returns all attributes\.
 .
 .IP "\(bu" 4
 \fIDefault\fR: all
 .
 .IP "" 0
 .
 .SS "ldapbase"
 The search base for LDAP searches\. It\'s impossible to provide a meaningful default here, although the LDAP libraries might have one already set\. Generally, it should be the \'ou=Hosts\' branch under your main directory\.
 .
 .SS "ldapclassattrs"
 The LDAP attributes to use to define Puppet classes\. Values should be comma\-separated\.
 .
 .IP "\(bu" 4
 \fIDefault\fR: puppetclass
 .
 .IP "" 0
 .
 .SS "ldapparentattr"
 The attribute to use to define the parent node\.
 .
 .IP "\(bu" 4
 \fIDefault\fR: parentnode
 .
 .IP "" 0
 .
 .SS "ldappassword"
 The password to use to connect to LDAP\.
 .
 .SS "ldapport"
 The LDAP port\. Only used if \fBnode_terminus\fR is set to \fBldap\fR\.
 .
 .IP "\(bu" 4
 \fIDefault\fR: 389
 .
 .IP "" 0
 .
 .SS "ldapserver"
 The LDAP server\. Only used if \fBnode_terminus\fR is set to \fBldap\fR\.
 .
 .IP "\(bu" 4
 \fIDefault\fR: ldap
 .
 .IP "" 0
 .
 .SS "ldapssl"
 Whether SSL should be used when searching for nodes\. Defaults to false because SSL usually requires certificates to be set up on the client side\.
 .
 .IP "\(bu" 4
 \fIDefault\fR: false
 .
 .IP "" 0
 .
 .SS "ldapstackedattrs"
 The LDAP attributes that should be stacked to arrays by adding the values in all hierarchy elements of the tree\. Values should be comma\-separated\.
 .
 .IP "\(bu" 4
 \fIDefault\fR: puppetvar
 .
 .IP "" 0
 .
 .SS "ldapstring"
 The search string used to find an LDAP node\.
 .
 .IP "\(bu" 4
 \fIDefault\fR: (&(objectclass=puppetClient)(cn=%s))
 .
 .IP "" 0
 .
 .SS "ldaptls"
 Whether TLS should be used when searching for nodes\. Defaults to false because TLS usually requires certificates to be set up on the client side\.
 .
 .IP "\(bu" 4
 \fIDefault\fR: false
 .
 .IP "" 0
 .
 .SS "ldapuser"
 The user to use to connect to LDAP\. Must be specified as a full DN\.
 .
 .SS "legacy_query_parameter_serialization"
 The serialization format to use when sending file_metadata query parameters\. Older versions of puppet master expect certain query parameters to be serialized as yaml, which is deprecated\.
 .
 .P
 This should almost always be false\. It can be temporarily set to true to let agents using this Puppet version connect to a puppet master running Puppet 3\.0\.0 through 3\.2\.x\.
 .
 .P
 Note that this is set to true automatically if the agent detects an older master, so should never need to be set explicitly\.
 .
 .IP "\(bu" 4
 \fIDefault\fR: false
 .
 .IP "" 0
 .
 .SS "libdir"
 An extra search path for Puppet\. This is only useful for those files that Puppet will load on demand, and is only guaranteed to work for those cases\. In fact, the autoload mechanism is responsible for making sure this directory is in Ruby\'s search path
 .
 .IP "\(bu" 4
 \fIDefault\fR: $vardir/lib
 .
 .IP "" 0
 .
 .SS "listen"
 Whether puppet agent should listen for connections\. If this is true, then puppet agent will accept incoming REST API requests, subject to the default ACLs and the ACLs set in the \fBrest_authconfig\fR file\. Puppet agent can respond usefully to requests on the \fBrun\fR, \fBcertificate\fR, and \fBresource\fR endpoints\.
 .
 .IP "\(bu" 4
 \fIDefault\fR: false
 .
 .IP "" 0
 .
 .SS "localcacert"
 Where each client stores the CA certificate\.
 .
 .IP "\(bu" 4
 \fIDefault\fR: $certdir/ca\.pem
 .
 .IP "" 0
 .
 .SS "localconfig"
 Where puppet agent caches the local configuration\. An extension indicating the cache format is added automatically\.
 .
 .IP "\(bu" 4
 \fIDefault\fR: $statedir/localconfig
 .
 .IP "" 0
 .
 .SS "log_level"
 Default logging level for messages from Puppet\. Allowed values are:
 .
 .IP "\(bu" 4
 debug
 .
 .IP "\(bu" 4
 info
 .
 .IP "\(bu" 4
 notice
 .
 .IP "\(bu" 4
 warning
 .
 .IP "\(bu" 4
 err
 .
 .IP "\(bu" 4
 alert
 .
 .IP "\(bu" 4
 emerg
 .
 .IP "\(bu" 4
 crit
 .
 .IP "\(bu" 4
 \fIDefault\fR: notice
 .
 .IP "" 0
 .
 .SS "logdir"
 The directory in which to store log files
 .
 .TP
 \fIDefault\fR:
 
 .
 .SS "manage_internal_file_permissions"
 Whether Puppet should manage the owner, group, and mode of files it uses internally
 .
 .IP "\(bu" 4
 \fIDefault\fR: true
 .
 .IP "" 0
 .
 .SS "manifest"
 The entry\-point manifest for puppet master\. This can be one file or a directory of manifests to be evaluated in alphabetical order\. Puppet manages this path as a directory if one exists or if the path ends with a / or \.
 .
 .P
 Setting a global value for \fBmanifest\fR in puppet\.conf is deprecated\. Please use directory environments instead\. If you need to use something other than the environment\'s \fBmanifests\fR directory as the main manifest, you can set \fBmanifest\fR in environment\.conf\. For more info, see http://docs\.puppetlabs\.com/puppet/latest/reference/environments\.html
 .
 .IP "\(bu" 4
 \fIDefault\fR: $manifestdir/site\.pp
 .
 .IP "" 0
 .
 .SS "manifestdir"
 Used to build the default value of the \fBmanifest\fR setting\. Has no other purpose\.
 .
 .P
 This setting is deprecated\.
 .
 .IP "\(bu" 4
 \fIDefault\fR: $confdir/manifests
 .
 .IP "" 0
 .
 .SS "masterhttplog"
 Where the puppet master web server saves its access log\. This is only used when running a WEBrick puppet master\. When puppet master is running under a Rack server like Passenger, that web server will have its own logging behavior\.
 .
 .IP "\(bu" 4
 \fIDefault\fR: $logdir/masterhttp\.log
 .
 .IP "" 0
 .
 .SS "masterport"
 The port for puppet master traffic\. For puppet master, this is the port to listen on; for puppet agent, this is the port to make requests on\. Both applications use this setting to get the port\.
 .
 .IP "\(bu" 4
 \fIDefault\fR: 8140
 .
 .IP "" 0
 .
 .SS "max_deprecations"
 Sets the max number of logged/displayed parser validation deprecation warnings in case multiple deprecation warnings have been detected\. A value of 0 blocks the logging of deprecation warnings\. The count is per manifest\.
 .
 .IP "\(bu" 4
 \fIDefault\fR: 10
 .
 .IP "" 0
 .
 .SS "max_errors"
 Sets the max number of logged/displayed parser validation errors in case multiple errors have been detected\. A value of 0 is the same as a value of 1; a minimum of one error is always raised\. The count is per manifest\.
 .
 .IP "\(bu" 4
 \fIDefault\fR: 10
 .
 .IP "" 0
 .
 .SS "max_warnings"
 Sets the max number of logged/displayed parser validation warnings in case multiple warnings have been detected\. A value of 0 blocks logging of warnings\. The count is per manifest\.
 .
 .IP "\(bu" 4
 \fIDefault\fR: 10
 .
 .IP "" 0
 .
 .SS "maximum_uid"
 The maximum allowed UID\. Some platforms use negative UIDs but then ship with tools that do not know how to handle signed ints, so the UIDs show up as huge numbers that can then not be fed back into the system\. This is a hackish way to fail in a slightly more useful way when that happens\.
 .
 .IP "\(bu" 4
 \fIDefault\fR: 4294967290
 .
 .IP "" 0
 .
 .SS "mkusers"
 Whether to create the necessary user and group that puppet agent will run as\.
 .
 .IP "\(bu" 4
 \fIDefault\fR: false
 .
 .IP "" 0
 .
 .SS "module_groups"
 Extra module groups to request from the Puppet Forge
 .
 .TP
 \fIDefault\fR:
 
 .
 .SS "module_repository"
 The module repository
 .
 .IP "\(bu" 4
 \fIDefault\fR: https://forgeapi\.puppetlabs\.com
 .
 .IP "" 0
 .
 .SS "module_skeleton_dir"
 The directory which the skeleton for module tool generate is stored\.
 .
 .IP "\(bu" 4
 \fIDefault\fR: $module_working_dir/skeleton
 .
 .IP "" 0
 .
 .SS "module_working_dir"
 The directory into which module tool data is stored
 .
 .IP "\(bu" 4
 \fIDefault\fR: $vardir/puppet\-module
 .
 .IP "" 0
 .
 .SS "modulepath"
 The search path for modules, as a list of directories separated by the system path separator character\. (The POSIX path separator is \':\', and the Windows path separator is \';\'\.)
 .
 .P
 Setting a global value for \fBmodulepath\fR in puppet\.conf is deprecated\. Please use directory environments instead\. If you need to use something other than the default modulepath of \fB<ACTIVE ENVIRONMENT\'S MODULES DIR>:$basemodulepath\fR, you can set \fBmodulepath\fR in environment\.conf\. For more info, see http://docs\.puppetlabs\.com/puppet/latest/reference/environments\.html
 .
 .IP "\(bu" 4
 \fIDefault\fR: $basemodulepath
 .
 .IP "" 0
 .
 .SS "name"
 The name of the application, if we are running as one\. The default is essentially $0 without the path or \fB\.rb\fR\.
 .
 .TP
 \fIDefault\fR:
 
 .
 .SS "node_cache_terminus"
 How to store cached nodes\. Valid values are (none), \'json\', \'msgpack\', \'yaml\' or write only yaml (\'write_only_yaml\')\. The master application defaults to \'write_only_yaml\', all others to none\.
 .
 .TP
 \fIDefault\fR:
 
 .
 .SS "node_name"
 How the puppet master determines the client\'s identity and sets the \'hostname\', \'fqdn\' and \'domain\' facts for use in the manifest, in particular for determining which \'node\' statement applies to the client\. Possible values are \'cert\' (use the subject\'s CN in the client\'s certificate) and \'facter\' (use the hostname that the client reported in its facts)
 .
 .IP "\(bu" 4
 \fIDefault\fR: cert
 .
 .IP "" 0
 .
 .SS "node_name_fact"
 The fact name used to determine the node name used for all requests the agent makes to the master\. WARNING: This setting is mutually exclusive with node_name_value\. Changing this setting also requires changes to the default auth\.conf configuration on the Puppet Master\. Please see http://links\.puppetlabs\.com/node_name_fact for more information\.
 .
 .SS "node_name_value"
 The explicit value used for the node name for all requests the agent makes to the master\. WARNING: This setting is mutually exclusive with node_name_fact\. Changing this setting also requires changes to the default auth\.conf configuration on the Puppet Master\. Please see http://links\.puppetlabs\.com/node_name_value for more information\.
 .
 .IP "\(bu" 4
 \fIDefault\fR: $certname
 .
 .IP "" 0
 .
 .SS "node_terminus"
 Where to find information about nodes\.
 .
 .IP "\(bu" 4
 \fIDefault\fR: plain
 .
 .IP "" 0
 .
 .SS "noop"
 Whether to apply catalogs in noop mode, which allows Puppet to partially simulate a normal run\. This setting affects puppet agent and puppet apply\.
 .
 .P
 When running in noop mode, Puppet will check whether each resource is in sync, like it does when running normally\. However, if a resource attribute is not in the desired state (as declared in the catalog), Puppet will take no action, and will instead report the changes it \fIwould\fR have made\. These simulated changes will appear in the report sent to the puppet master, or be shown on the console if running puppet agent or puppet apply in the foreground\. The simulated changes will not send refresh events to any subscribing or notified resources, although Puppet will log that a refresh event \fIwould\fR have been sent\.
 .
 .P
 \fBImportant note:\fR The \fBnoop\fR metaparameter \fIhttp://docs\.puppetlabs\.com/references/latest/metaparameter\.html#noop\fR allows you to apply individual resources in noop mode, and will override the global value of the \fBnoop\fR setting\. This means a resource with \fBnoop => false\fR \fIwill\fR be changed if necessary, even when running puppet agent with \fBnoop = true\fR or \fB\-\-noop\fR\. (Conversely, a resource with \fBnoop => true\fR will only be simulated, even when noop mode is globally disabled\.)
 .
 .IP "\(bu" 4
 \fIDefault\fR: false
 .
 .IP "" 0
 .
 .SS "onetime"
 Perform one configuration run and exit, rather than spawning a long\-running daemon\. This is useful for interactively running puppet agent, or running puppet agent from cron\.
 .
 .IP "\(bu" 4
 \fIDefault\fR: false
 .
 .IP "" 0
 .
 .SS "ordering"
 How unrelated resources should be ordered when applying a catalog\. Allowed values are \fBtitle\-hash\fR, \fBmanifest\fR, and \fBrandom\fR\. This setting affects puppet agent and puppet apply, but not puppet master\.
 .
 .IP "\(bu" 4
 \fBtitle\-hash\fR (the default) will order resources randomly, but will use the same order across runs and across nodes\.
 .
 .IP "\(bu" 4
 \fBmanifest\fR will use the order in which the resources were declared in their manifest files\.
 .
 .IP "\(bu" 4
 \fBrandom\fR will order resources randomly and change their order with each run\. This can work like a fuzzer for shaking out undeclared dependencies\.
 .
 .IP "" 0
 .
 .P
 Regardless of this setting\'s value, Puppet will always obey explicit dependencies set with the before/require/notify/subscribe metaparameters and the \fB\->\fR/\fB~>\fR chaining arrows; this setting only affects the relative ordering of \fIunrelated\fR resources\.
 .
 .IP "\(bu" 4
 \fIDefault\fR: manifest
 .
 .IP "" 0
 .
 .SS "parser"
 Selects the parser to use for parsing puppet manifests (in puppet DSL language/\'\.pp\' files)\. Available choices are \fBcurrent\fR (the default) and \fBfuture\fR\.
 .
 .P
 The \fBcurrent\fR parser means that the released version of the parser should be used\.
 .
 .P
 The \fBfuture\fR parser is a "time travel to the future" allowing early exposure to new language features\. What these features are will vary from release to release and they may be invididually configurable\.
 .
 .P
 Available Since Puppet 3\.2\.
 .
 .IP "\(bu" 4
 \fIDefault\fR: current
 .
 .IP "" 0
 .
 .SS "passfile"
 Where puppet agent stores the password for its private key\. Generally unused\.
 .
 .IP "\(bu" 4
 \fIDefault\fR: $privatedir/password
 .
 .IP "" 0
 .
 .SS "path"
 The shell search path\. Defaults to whatever is inherited from the parent process\.
 .
 .IP "\(bu" 4
 \fIDefault\fR: none
 .
 .IP "" 0
 .
 .SS "pidfile"
 The file containing the PID of a running process\. This file is intended to be used by service management frameworks and monitoring systems to determine if a puppet process is still in the process table\.
 .
 .IP "\(bu" 4
 \fIDefault\fR: $rundir/${run_mode}\.pid
 .
 .IP "" 0
 .
 .SS "plugindest"
 Where Puppet should store plugins that it pulls down from the central server\.
 .
 .IP "\(bu" 4
 \fIDefault\fR: $libdir
 .
 .IP "" 0
 .
 .SS "pluginfactdest"
 Where Puppet should store external facts that are being handled by pluginsync
 .
 .IP "\(bu" 4
 \fIDefault\fR: $vardir/facts\.d
 .
 .IP "" 0
 .
 .SS "pluginfactsource"
 Where to retrieve external facts for pluginsync
 .
 .IP "\(bu" 4
 \fIDefault\fR: puppet://$server/pluginfacts
 .
 .IP "" 0
 .
 .SS "pluginsignore"
 What files to ignore when pulling down plugins\.
 .
 .IP "\(bu" 4
 \fIDefault\fR: \.svn CVS \.git
 .
 .IP "" 0
 .
 .SS "pluginsource"
 From where to retrieve plugins\. The standard Puppet \fBfile\fR type is used for retrieval, so anything that is a valid file source can be used here\.
 .
 .IP "\(bu" 4
 \fIDefault\fR: puppet://$server/plugins
 .
 .IP "" 0
 .
 .SS "pluginsync"
 Whether plugins should be synced with the central server\.
 .
 .IP "\(bu" 4
 \fIDefault\fR: true
 .
 .IP "" 0
 .
 .SS "postrun_command"
 A command to run after every agent run\. If this command returns a non\-zero return code, the entire Puppet run will be considered to have failed, even though it might have performed work during the normal run\.
 .
 .SS "preferred_serialization_format"
 The preferred means of serializing ruby instances for passing over the wire\. This won\'t guarantee that all instances will be serialized using this method, since not all classes can be guaranteed to support this format, but it will be used for all classes that support it\.
 .
 .IP "\(bu" 4
 \fIDefault\fR: pson
 .
 .IP "" 0
 .
 .SS "prerun_command"
 A command to run before every agent run\. If this command returns a non\-zero return code, the entire Puppet run will fail\.
 .
 .SS "priority"
 The scheduling priority of the process\. Valid values are \'high\', \'normal\', \'low\', or \'idle\', which are mapped to platform\-specific values\. The priority can also be specified as an integer value and will be passed as is, e\.g\. \-5\. Puppet must be running as a privileged user in order to increase scheduling priority\.
 .
 .TP
 \fIDefault\fR:
 
 .
 .SS "privatedir"
 Where the client stores private certificate information\.
 .
 .IP "\(bu" 4
 \fIDefault\fR: $ssldir/private
 .
 .IP "" 0
 .
 .SS "privatekeydir"
 The private key directory\.
 .
 .IP "\(bu" 4
 \fIDefault\fR: $ssldir/private_keys
 .
 .IP "" 0
 .
 .SS "profile"
 Whether to enable experimental performance profiling
 .
 .IP "\(bu" 4
 \fIDefault\fR: false
 .
 .IP "" 0
 .
 .SS "publickeydir"
 The public key directory\.
 .
 .IP "\(bu" 4
 \fIDefault\fR: $ssldir/public_keys
 .
 .IP "" 0
 .
 .SS "puppetdlog"
 The fallback log file\. This is only used when the \fB\-\-logdest\fR option is not specified AND Puppet is running on an operating system where both the POSIX syslog service and the Windows Event Log are unavailable\. (Currently, no supported operating systems match that description\.)
 .
 .P
 Despite the name, both puppet agent and puppet master will use this file as the fallback logging destination\.
 .
 .P
 For control over logging destinations, see the \fB\-\-logdest\fR command line option in the manual pages for puppet master, puppet agent, and puppet apply\. You can see man pages by running \fBpuppet <SUBCOMMAND> \-\-help\fR, or read them online at http://docs\.puppetlabs\.com/references/latest/man/\.
 .
 .IP "\(bu" 4
 \fIDefault\fR: $logdir/puppetd\.log
 .
 .IP "" 0
 .
 .SS "puppetport"
 Which port puppet agent listens on\.
 .
 .IP "\(bu" 4
 \fIDefault\fR: 8139
 .
 .IP "" 0
 .
-.SS "queue_source"
-Which type of queue to use for asynchronous processing\. If your stomp server requires authentication, you can include it in the URI as long as your stomp client library is at least 1\.1\.1
-.
-.IP "\(bu" 4
-\fIDefault\fR: stomp://localhost:61613/
-.
-.IP "" 0
-.
-.SS "queue_type"
-Which type of queue to use for asynchronous processing\.
-.
-.IP "\(bu" 4
-\fIDefault\fR: stomp
-.
-.IP "" 0
-.
 .SS "rails_loglevel"
 The log level for Rails connections\. The value must be a valid log level within Rails\. Production environments normally use \fBinfo\fR and other environments normally use \fBdebug\fR\. This setting is only used by the ActiveRecord storeconfigs and inventory backends, which are deprecated\.
 .
 .IP "\(bu" 4
 \fIDefault\fR: info
 .
 .IP "" 0
 .
 .SS "railslog"
 Where Rails\-specific logs are sent\. This setting is only used by the ActiveRecord storeconfigs and inventory backends, which are deprecated\.
 .
 .IP "\(bu" 4
 \fIDefault\fR: $logdir/rails\.log
 .
 .IP "" 0
 .
 .SS "report"
 Whether to send reports after every transaction\.
 .
 .IP "\(bu" 4
 \fIDefault\fR: true
 .
 .IP "" 0
 .
 .SS "report_port"
 The port to communicate with the report_server\.
 .
 .IP "\(bu" 4
 \fIDefault\fR: $masterport
 .
 .IP "" 0
 .
 .SS "report_serialization_format"
 The serialization format to use when sending reports to the \fBreport_server\fR\. Possible values are \fBpson\fR and \fByaml\fR\. This setting affects puppet agent, but not puppet apply (which processes its own reports)\.
 .
 .P
 This should almost always be set to \fBpson\fR\. It can be temporarily set to \fByaml\fR to let agents using this Puppet version connect to a puppet master running Puppet 3\.0\.0 through 3\.2\.x\.
 .
 .P
 Note that this is set to \'yaml\' automatically if the agent detects an older master, so should never need to be set explicitly\.
 .
 .IP "\(bu" 4
 \fIDefault\fR: pson
 .
 .IP "" 0
 .
 .SS "report_server"
 The server to send transaction reports to\.
 .
 .IP "\(bu" 4
 \fIDefault\fR: $server
 .
 .IP "" 0
 .
 .SS "reportdir"
 The directory in which to store reports\. Each node gets a separate subdirectory in this directory\. This setting is only used when the \fBstore\fR report processor is enabled (see the \fBreports\fR setting)\.
 .
 .IP "\(bu" 4
 \fIDefault\fR: $vardir/reports
 .
 .IP "" 0
 .
 .SS "reportfrom"
 The \'from\' email address for the reports\.
 .
 .IP "\(bu" 4
 \fIDefault\fR: report@aparker\.corp\.puppetlabs\.net
 .
 .IP "" 0
 .
 .SS "reports"
 The list of report handlers to use\. When using multiple report handlers, their names should be comma\-separated, with whitespace allowed\. (For example, \fBreports = http, tagmail\fR\.)
 .
 .P
 This setting is relevant to puppet master and puppet apply\. The puppet master will call these report handlers with the reports it receives from agent nodes, and puppet apply will call them with its own report\. (In all cases, the node applying the catalog must have \fBreport = true\fR\.)
 .
 .P
 See the report reference for information on the built\-in report handlers; custom report handlers can also be loaded from modules\. (Report handlers are loaded from the lib directory, at \fBpuppet/reports/NAME\.rb\fR\.)
 .
 .IP "\(bu" 4
 \fIDefault\fR: store
 .
 .IP "" 0
 .
 .SS "reporturl"
 The URL that reports should be forwarded to\. This setting is only used when the \fBhttp\fR report processor is enabled (see the \fBreports\fR setting)\.
 .
 .IP "\(bu" 4
 \fIDefault\fR: http://localhost:3000/reports/upload
 .
 .IP "" 0
 .
 .SS "req_bits"
 The bit length of the certificates\.
 .
 .IP "\(bu" 4
 \fIDefault\fR: 4096
 .
 .IP "" 0
 .
 .SS "requestdir"
 Where host certificate requests are stored\.
 .
 .IP "\(bu" 4
 \fIDefault\fR: $ssldir/certificate_requests
 .
 .IP "" 0
 .
 .SS "resourcefile"
 The file in which puppet agent stores a list of the resources associated with the retrieved configuration\.
 .
 .IP "\(bu" 4
 \fIDefault\fR: $statedir/resources\.txt
 .
 .IP "" 0
 .
 .SS "rest_authconfig"
 The configuration file that defines the rights to the different rest indirections\. This can be used as a fine\-grained authorization system for \fBpuppet master\fR\.
 .
 .IP "\(bu" 4
 \fIDefault\fR: $confdir/auth\.conf
 .
 .IP "" 0
 .
 .SS "route_file"
 The YAML file containing indirector route configuration\.
 .
 .IP "\(bu" 4
 \fIDefault\fR: $confdir/routes\.yaml
 .
 .IP "" 0
 .
 .SS "rrddir"
 The directory where RRD database files are stored\. Directories for each reporting host will be created under this directory\.
 .
 .IP "\(bu" 4
 \fIDefault\fR: $vardir/rrd
 .
 .IP "" 0
 .
 .SS "rrdinterval"
 How often RRD should expect data\. This should match how often the hosts report back to the server\. This setting can be a time interval in seconds (30 or 30s), minutes (30m), hours (6h), days (2d), or years (5y)\.
 .
 .IP "\(bu" 4
 \fIDefault\fR: $runinterval
 .
 .IP "" 0
 .
 .SS "rundir"
 Where Puppet PID files are kept\.
 .
 .TP
 \fIDefault\fR:
 
 .
 .SS "runinterval"
 How often puppet agent applies the catalog\. Note that a runinterval of 0 means "run continuously" rather than "never run\." If you want puppet agent to never run, you should start it with the \fB\-\-no\-client\fR option\. This setting can be a time interval in seconds (30 or 30s), minutes (30m), hours (6h), days (2d), or years (5y)\.
 .
 .IP "\(bu" 4
 \fIDefault\fR: 30m
 .
 .IP "" 0
 .
 .SS "sendmail"
 Where to find the sendmail binary with which to send email\.
 .
 .IP "\(bu" 4
 \fIDefault\fR: /usr/sbin/sendmail
 .
 .IP "" 0
 .
 .SS "serial"
 Where the serial number for certificates is stored\.
 .
 .IP "\(bu" 4
 \fIDefault\fR: $cadir/serial
 .
 .IP "" 0
 .
 .SS "server"
 The puppet master server to which the puppet agent should connect\.
 .
 .IP "\(bu" 4
 \fIDefault\fR: puppet
 .
 .IP "" 0
 .
 .SS "server_datadir"
 The directory in which serialized data is stored, usually in a subdirectory\.
 .
 .IP "\(bu" 4
 \fIDefault\fR: $vardir/server_data
 .
 .IP "" 0
 .
 .SS "show_diff"
 Whether to log and report a contextual diff when files are being replaced\. This causes partial file contents to pass through Puppet\'s normal logging and reporting system, so this setting should be used with caution if you are sending Puppet\'s reports to an insecure destination\. This feature currently requires the \fBdiff/lcs\fR Ruby library\.
 .
 .IP "\(bu" 4
 \fIDefault\fR: false
 .
 .IP "" 0
 .
 .SS "signeddir"
 Where the CA stores signed certificates\.
 .
 .IP "\(bu" 4
 \fIDefault\fR: $cadir/signed
 .
 .IP "" 0
 .
 .SS "smtphelo"
 The name by which we identify ourselves in SMTP HELO for reports\. If you send to a smtpserver which does strict HELO checking (as with Postfix\'s \fBsmtpd_helo_restrictions\fR access controls), you may need to ensure this resolves\.
 .
 .IP "\(bu" 4
 \fIDefault\fR: aparker\.corp\.puppetlabs\.net
 .
 .IP "" 0
 .
 .SS "smtpport"
 The TCP port through which to send email reports\.
 .
 .IP "\(bu" 4
 \fIDefault\fR: 25
 .
 .IP "" 0
 .
 .SS "smtpserver"
 The server through which to send email reports\.
 .
 .IP "\(bu" 4
 \fIDefault\fR: none
 .
 .IP "" 0
 .
 .SS "splay"
 Whether to sleep for a pseudo\-random (but consistent) amount of time before a run\.
 .
 .IP "\(bu" 4
 \fIDefault\fR: false
 .
 .IP "" 0
 .
 .SS "splaylimit"
 The maximum time to delay before runs\. Defaults to being the same as the run interval\. This setting can be a time interval in seconds (30 or 30s), minutes (30m), hours (6h), days (2d), or years (5y)\.
 .
 .IP "\(bu" 4
 \fIDefault\fR: $runinterval
 .
 .IP "" 0
 .
 .SS "srv_domain"
 The domain which will be queried to find the SRV records of servers to use\.
 .
 .IP "\(bu" 4
 \fIDefault\fR: corp\.puppetlabs\.net
 .
 .IP "" 0
 .
 .SS "ssl_client_ca_auth"
 Certificate authorities who issue server certificates\. SSL servers will not be considered authentic unless they possess a certificate issued by an authority listed in this file\. If this setting has no value then the Puppet master\'s CA certificate (localcacert) will be used\.
 .
 .TP
 \fIDefault\fR:
 
 .
 .SS "ssl_client_header"
 The header containing an authenticated client\'s SSL DN\. This header must be set by the proxy to the authenticated client\'s SSL DN (e\.g\., \fB/CN=puppet\.puppetlabs\.com\fR)\. Puppet will parse out the Common Name (CN) from the Distinguished Name (DN) and use the value of the CN field for authorization\.
 .
 .P
 Note that the name of the HTTP header gets munged by the web server common gateway inteface: an \fBHTTP_\fR prefix is added, dashes are converted to underscores, and all letters are uppercased\. Thus, to use the \fBX\-Client\-DN\fR header, this setting should be \fBHTTP_X_CLIENT_DN\fR\.
 .
 .IP "\(bu" 4
 \fIDefault\fR: HTTP_X_CLIENT_DN
 .
 .IP "" 0
 .
 .SS "ssl_client_verify_header"
 The header containing the status message of the client verification\. This header must be set by the proxy to \'SUCCESS\' if the client successfully authenticated, and anything else otherwise\.
 .
 .P
 Note that the name of the HTTP header gets munged by the web server common gateway inteface: an \fBHTTP_\fR prefix is added, dashes are converted to underscores, and all letters are uppercased\. Thus, to use the \fBX\-Client\-Verify\fR header, this setting should be \fBHTTP_X_CLIENT_VERIFY\fR\.
 .
 .IP "\(bu" 4
 \fIDefault\fR: HTTP_X_CLIENT_VERIFY
 .
 .IP "" 0
 .
 .SS "ssl_server_ca_auth"
 Certificate authorities who issue client certificates\. SSL clients will not be considered authentic unless they possess a certificate issued by an authority listed in this file\. If this setting has no value then the Puppet master\'s CA certificate (localcacert) will be used\.
 .
 .TP
 \fIDefault\fR:
 
 .
 .SS "ssldir"
 Where SSL certificates are kept\.
 .
 .IP "\(bu" 4
 \fIDefault\fR: $confdir/ssl
 .
 .IP "" 0
 .
 .SS "statedir"
 The directory where Puppet state is stored\. Generally, this directory can be removed without causing harm (although it might result in spurious service restarts)\.
 .
 .IP "\(bu" 4
 \fIDefault\fR: $vardir/state
 .
 .IP "" 0
 .
 .SS "statefile"
 Where puppet agent and puppet master store state associated with the running configuration\. In the case of puppet master, this file reflects the state discovered through interacting with clients\.
 .
 .IP "\(bu" 4
 \fIDefault\fR: $statedir/state\.yaml
 .
 .IP "" 0
 .
 .SS "storeconfigs"
 Whether to store each client\'s configuration, including catalogs, facts, and related data\. This also enables the import and export of resources in the Puppet language \- a mechanism for exchange resources between nodes\.
 .
 .P
 By default this uses ActiveRecord and an SQL database to store and query the data; this, in turn, will depend on Rails being available\.
 .
 .P
 You can adjust the backend using the storeconfigs_backend setting\.
 .
 .IP "\(bu" 4
 \fIDefault\fR: false
 .
 .IP "" 0
 .
 .SS "storeconfigs_backend"
 Configure the backend terminus used for StoreConfigs\. By default, this uses the ActiveRecord store, which directly talks to the database from within the Puppet Master process\.
 .
 .IP "\(bu" 4
 \fIDefault\fR: active_record
 .
 .IP "" 0
 .
 .SS "strict_hostname_checking"
 Whether to only search for the complete hostname as it is in the certificate when searching for node information in the catalogs\.
 .
 .IP "\(bu" 4
 \fIDefault\fR: false
 .
 .IP "" 0
 .
 .SS "strict_variables"
 Makes the parser raise errors when referencing unknown variables\. (This does not affect referencing variables that are explicitly set to undef)\.
 .
 .IP "\(bu" 4
 \fIDefault\fR: false
 .
 .IP "" 0
 .
 .SS "stringify_facts"
 Flatten fact values to strings using #to_s\. Means you can\'t have arrays or hashes as fact values\. (DEPRECATED) This option will be removed in Puppet 4\.0\.
 .
 .IP "\(bu" 4
 \fIDefault\fR: true
 .
 .IP "" 0
 .
 .SS "summarize"
 Whether to print a transaction summary\.
 .
 .IP "\(bu" 4
 \fIDefault\fR: false
 .
 .IP "" 0
 .
 .SS "syslogfacility"
 What syslog facility to use when logging to syslog\. Syslog has a fixed list of valid facilities, and you must choose one of those; you cannot just make one up\.
 .
 .IP "\(bu" 4
 \fIDefault\fR: daemon
 .
 .IP "" 0
 .
 .SS "tagmap"
 The mapping between reporting tags and email addresses\.
 .
 .IP "\(bu" 4
 \fIDefault\fR: $confdir/tagmail\.conf
 .
 .IP "" 0
 .
 .SS "tags"
 Tags to use to find resources\. If this is set, then only resources tagged with the specified tags will be applied\. Values must be comma\-separated\.
 .
 .SS "templatedir"
 Where Puppet looks for template files\. Can be a list of colon\-separated directories\.
 .
 .P
 This setting is deprecated\. Please put your templates in modules instead\.
 .
 .IP "\(bu" 4
 \fIDefault\fR: $vardir/templates
 .
 .IP "" 0
 .
 .SS "thin_storeconfigs"
 Boolean; whether Puppet should store only facts and exported resources in the storeconfigs database\. This will improve the performance of exported resources with the older \fBactive_record\fR backend, but will disable external tools that search the storeconfigs database\. Thinning catalogs is generally unnecessary when using PuppetDB to store catalogs\.
 .
 .IP "\(bu" 4
 \fIDefault\fR: false
 .
 .IP "" 0
 .
 .SS "trace"
 Whether to print stack traces on some errors
 .
 .IP "\(bu" 4
 \fIDefault\fR: false
 .
 .IP "" 0
 .
 .SS "trusted_node_data"
 Stores trusted node data in a hash called $trusted\. When true also prevents $trusted from being overridden in any scope\.
 .
 .IP "\(bu" 4
 \fIDefault\fR: false
 .
 .IP "" 0
 .
 .SS "use_cached_catalog"
 Whether to only use the cached catalog rather than compiling a new catalog on every run\. Puppet can be run with this enabled by default and then selectively disabled when a recompile is desired\.
 .
 .IP "\(bu" 4
 \fIDefault\fR: false
 .
 .IP "" 0
 .
 .SS "use_srv_records"
 Whether the server will search for SRV records in DNS for the current domain\.
 .
 .IP "\(bu" 4
 \fIDefault\fR: false
 .
 .IP "" 0
 .
 .SS "usecacheonfailure"
 Whether to use the cached configuration when the remote configuration will not compile\. This option is useful for testing new configurations, where you want to fix the broken configuration rather than reverting to a known\-good one\.
 .
 .IP "\(bu" 4
 \fIDefault\fR: true
 .
 .IP "" 0
 .
 .SS "user"
 The user puppet master should run as\.
 .
 .IP "\(bu" 4
 \fIDefault\fR: puppet
 .
 .IP "" 0
 .
 .SS "vardir"
 Where Puppet stores dynamic and growing data\. The default for this setting is calculated specially, like \fBconfdir\fR_\.
 .
 .IP "\(bu" 4
 \fIDefault\fR: /var/lib/puppet
 .
 .IP "" 0
 .
 .SS "waitforcert"
 How frequently puppet agent should ask for a signed certificate\.
 .
 .P
 When starting for the first time, puppet agent will submit a certificate signing request (CSR) to the server named in the \fBca_server\fR setting (usually the puppet master); this may be autosigned, or may need to be approved by a human, depending on the CA server\'s configuration\.
 .
 .P
 Puppet agent cannot apply configurations until its approved certificate is available\. Since the certificate may or may not be available immediately, puppet agent will repeatedly try to fetch it at this interval\. You can turn off waiting for certificates by specifying a time of 0, in which case puppet agent will exit if it cannot get a cert\. This setting can be a time interval in seconds (30 or 30s), minutes (30m), hours (6h), days (2d), or years (5y)\.
 .
 .IP "\(bu" 4
 \fIDefault\fR: 2m
 .
 .IP "" 0
 .
 .SS "yamldir"
 The directory in which YAML data is stored, usually in a subdirectory\.
 .
 .IP "\(bu" 4
 \fIDefault\fR: $vardir/yaml
 .
 .IP "" 0
 .
 .SS "zlib"
 Boolean; whether to use the zlib library
 .
 .IP "\(bu" 4
 \fIDefault\fR: true
 .
 .IP "" 0
 .
 .P
-\fIThis page autogenerated on 2014\-09\-15 12:02:46 \-0700\fR
+\fIThis page autogenerated on 2014\-09\-16 20:41:04 \-0700\fR
diff --git a/man/man8/puppet-catalog.8 b/man/man8/puppet-catalog.8
index 37c4c4a9e..4c654718e 100644
--- a/man/man8/puppet-catalog.8
+++ b/man/man8/puppet-catalog.8
@@ -1,295 +1,292 @@
 .\" generated with Ronn/v0.7.3
 .\" http://github.com/rtomayko/ronn/tree/0.7.3
 .
 .TH "PUPPET\-CATALOG" "8" "September 2014" "Puppet Labs, LLC" "Puppet manual"
 .
 .SH "NAME"
 \fBpuppet\-catalog\fR \- Compile, save, view, and convert catalogs\.
 .
 .SH "SYNOPSIS"
 puppet catalog \fIaction\fR [\-\-terminus TERMINUS] [\-\-extra HASH]
 .
 .SH "DESCRIPTION"
 This subcommand deals with catalogs, which are compiled per\-node artifacts generated from a set of Puppet manifests\. By default, it interacts with the compiling subsystem and compiles a catalog using the default manifest and \fBcertname\fR, but you can change the source of the catalog with the \fB\-\-terminus\fR option\. You can also choose to print any catalog in \'dot\' format (for easy graph viewing with OmniGraffle or Graphviz) with \'\-\-render\-as dot\'\.
 .
 .SH "OPTIONS"
 Note that any setting that\'s valid in the configuration file is also a valid long argument, although it may or may not be relevant to the present action\. For example, \fBserver\fR and \fBrun_mode\fR are valid settings, so you can specify \fB\-\-server <servername>\fR, or \fB\-\-run_mode <runmode>\fR as an argument\.
 .
 .P
 See the configuration file documentation at \fIhttp://docs\.puppetlabs\.com/references/stable/configuration\.html\fR for the full list of acceptable parameters\. A commented list of all configuration options can also be generated by running puppet with \fB\-\-genconfig\fR\.
 .
 .TP
 \-\-render\-as FORMAT
 The format in which to render output\. The most common formats are \fBjson\fR, \fBs\fR (string), \fByaml\fR, and \fBconsole\fR, but other options such as \fBdot\fR are sometimes available\.
 .
 .TP
 \-\-verbose
 Whether to log verbosely\.
 .
 .TP
 \-\-debug
 Whether to log debug information\.
 .
 .TP
 \-\-extra HASH
 A terminus can take additional arguments to refine the operation, which are passed as an arbitrary hash to the back\-end\. Anything passed as the extra value is just send direct to the back\-end\.
 .
 .TP
 \-\-terminus TERMINUS
 Indirector faces expose indirected subsystems of Puppet\. These subsystems are each able to retrieve and alter a specific type of data (with the familiar actions of \fBfind\fR, \fBsearch\fR, \fBsave\fR, and \fBdestroy\fR) from an arbitrary number of pluggable backends\. In Puppet parlance, these backends are called terminuses\.
 .
 .IP
 Almost all indirected subsystems have a \fBrest\fR terminus that interacts with the puppet master\'s data\. Most of them have additional terminuses for various local data models, which are in turn used by the indirected subsystem on the puppet master whenever it receives a remote request\.
 .
 .IP
 The terminus for an action is often determined by context, but occasionally needs to be set explicitly\. See the "Notes" section of this face\'s manpage for more details\.
 .
 .SH "ACTIONS"
 .
 .TP
 \fBapply\fR \- Find and apply a catalog\.
 \fBSYNOPSIS\fR
 .
 .IP
 puppet catalog apply [\-\-terminus TERMINUS] [\-\-extra HASH]
 .
 .IP
 \fBDESCRIPTION\fR
 .
 .IP
 Finds and applies a catalog\. This action takes no arguments, but the source of the catalog can be managed with the \fB\-\-terminus\fR option\.
 .
 .IP
 \fBRETURNS\fR
 .
 .IP
 Nothing\. When used from the Ruby API, returns a Puppet::Transaction::Report object\.
 .
 .TP
 \fBdestroy\fR \- Invalid for this subcommand\.
 \fBSYNOPSIS\fR
 .
 .IP
 puppet catalog destroy [\-\-terminus TERMINUS] [\-\-extra HASH] \fIkey\fR
 .
 .IP
 \fBDESCRIPTION\fR
 .
 .IP
 Invalid for this subcommand\.
 .
 .TP
 \fBdownload\fR \- Download this node\'s catalog from the puppet master server\.
 \fBSYNOPSIS\fR
 .
 .IP
 puppet catalog download [\-\-terminus TERMINUS] [\-\-extra HASH]
 .
 .IP
 \fBDESCRIPTION\fR
 .
 .IP
 Retrieves a catalog from the puppet master and saves it to the local yaml cache\. This action always contacts the puppet master and will ignore alternate termini\.
 .
 .IP
 The saved catalog can be used in any subsequent catalog action by specifying \'\-\-terminus yaml\' for that action\.
 .
 .IP
 \fBRETURNS\fR
 .
 .IP
 Nothing\.
 .
 .IP
 \fBNOTES\fR
 .
 .IP
 When used from the Ruby API, this action has a side effect of leaving Puppet::Resource::Catalog\.indirection\.terminus_class set to yaml\. The terminus must be explicitly re\-set for subsequent catalog actions\.
 .
 .TP
 \fBfind\fR \- Retrieve the catalog for a node\.
 \fBSYNOPSIS\fR
 .
 .IP
 puppet catalog find [\-\-terminus TERMINUS] [\-\-extra HASH] \fIcertname\fR
 .
 .IP
 \fBDESCRIPTION\fR
 .
 .IP
 Retrieve the catalog for a node\.
 .
 .IP
 \fBRETURNS\fR
 .
 .IP
 A serialized catalog\. When used from the Ruby API, returns a Puppet::Resource::Catalog object\.
 .
 .TP
 \fBinfo\fR \- Print the default terminus class for this face\.
 \fBSYNOPSIS\fR
 .
 .IP
 puppet catalog info [\-\-terminus TERMINUS] [\-\-extra HASH]
 .
 .IP
 \fBDESCRIPTION\fR
 .
 .IP
 Prints the default terminus class for this subcommand\. Note that different run modes may have different default termini; when in doubt, specify the run mode with the \'\-\-run_mode\' option\.
 .
 .TP
 \fBsave\fR \- API only: create or overwrite an object\.
 \fBSYNOPSIS\fR
 .
 .IP
 puppet catalog save [\-\-terminus TERMINUS] [\-\-extra HASH] \fIkey\fR
 .
 .IP
 \fBDESCRIPTION\fR
 .
 .IP
 API only: create or overwrite an object\. As the Faces framework does not currently accept data from STDIN, save actions cannot currently be invoked from the command line\.
 .
 .TP
 \fBsearch\fR \- Invalid for this subcommand\.
 \fBSYNOPSIS\fR
 .
 .IP
 puppet catalog search [\-\-terminus TERMINUS] [\-\-extra HASH] \fIquery\fR
 .
 .IP
 \fBDESCRIPTION\fR
 .
 .IP
 Invalid for this subcommand\.
 .
 .TP
 \fBselect\fR \- Retrieve a catalog and filter it for resources of a given type\.
 \fBSYNOPSIS\fR
 .
 .IP
 puppet catalog select [\-\-terminus TERMINUS] [\-\-extra HASH] \fIhost\fR \fIresource_type\fR
 .
 .IP
 \fBDESCRIPTION\fR
 .
 .IP
 Retrieves a catalog for the specified host, then searches it for all resources of the requested type\.
 .
 .IP
 \fBRETURNS\fR
 .
 .IP
 A list of resource references ("Type[title]")\. When used from the API, returns an array of Puppet::Resource objects excised from a catalog\.
 .
 .IP
 \fBNOTES\fR
 .
 .IP
 By default, this action will retrieve a catalog from Puppet\'s compiler subsystem; you must call the action with \fB\-\-terminus rest\fR if you wish to retrieve a catalog from the puppet master\.
 .
 .IP
 FORMATTING ISSUES: This action cannot currently render useful yaml; instead, it returns an entire catalog\. Use json instead\.
 .
 .SH "EXAMPLES"
 \fBapply\fR
 .
 .P
 Apply the locally cached catalog:
 .
 .P
 $ puppet catalog apply \-\-terminus yaml
 .
 .P
 Retrieve a catalog from the master and apply it, in one step:
 .
 .P
 $ puppet catalog apply \-\-terminus rest
 .
 .P
 From \fBsecret_agent\.rb\fR (API example):
 .
 .IP "" 4
 .
 .nf
 
 # \.\.\.
 Puppet::Face[:catalog, \'0\.0\.1\']\.download
 # (Termini are singletons; catalog\.download has a side effect of
 # setting the catalog terminus to yaml)
 report  = Puppet::Face[:catalog, \'0\.0\.1\']\.apply
 # \.\.\.
 .
 .fi
 .
 .IP "" 0
 .
 .P
 \fBdownload\fR
 .
 .P
 Retrieve and store a catalog:
 .
 .P
 $ puppet catalog download
 .
 .P
 From \fBsecret_agent\.rb\fR (API example):
 .
 .IP "" 4
 .
 .nf
 
 Puppet::Face[:plugin, \'0\.0\.1\']\.download
 Puppet::Face[:facts, \'0\.0\.1\']\.upload
 Puppet::Face[:catalog, \'0\.0\.1\']\.download
 # \.\.\.
 .
 .fi
 .
 .IP "" 0
 .
 .P
 \fBselect\fR
 .
 .P
 Ask the puppet master for a list of managed file resources for a node:
 .
 .P
 $ puppet catalog select \-\-terminus rest somenode\.magpie\.lan file
 .
 .SH "NOTES"
 This subcommand is an indirector face, which exposes \fBfind\fR, \fBsearch\fR, \fBsave\fR, and \fBdestroy\fR actions for an indirected subsystem of Puppet\. Valid termini for this face include:
 .
 .IP "\(bu" 4
 \fBactive_record\fR
 .
 .IP "\(bu" 4
 \fBcompiler\fR
 .
 .IP "\(bu" 4
 \fBjson\fR
 .
 .IP "\(bu" 4
 \fBmsgpack\fR
 .
 .IP "\(bu" 4
-\fBqueue\fR
-.
-.IP "\(bu" 4
 \fBrest\fR
 .
 .IP "\(bu" 4
 \fBstatic_compiler\fR
 .
 .IP "\(bu" 4
 \fBstore_configs\fR
 .
 .IP "\(bu" 4
 \fByaml\fR
 .
 .IP "" 0
 .
 .SH "COPYRIGHT AND LICENSE"
 Copyright 2011 by Puppet Labs Apache 2 license; see COPYING